$3,000 plus 3% paypal Selling my Custom built twincharge kit for Supercarged MINI's. Never installed changed my mind and going to stick with just a supercharger. Header is made of cast stainless It feaures a 3/8 inch thick stainless flange and a T3 turbo mounting flange. It is set up for a 38mm or 39mm wastegate. The Down Pipe has a two bolt style 3/8" thick flage that will mount up perfect to any OEM or after market Cat Back Exaust (Though I highly recomend after market). It also has a 3" flex pipe and O2 sensor bungs that is of an OEM exhaust manifold. It DOES NOT have a cat. converter. Also has a 5 bolt exhast flange-to-turbo. To mount this unit in you cooper s is nothing to challenging. You will have to relocate your power steering fluid tank and the coolant tank. Lots of trial and error went into getting the pipe to fit just right. It does not hit anything and has pleanty of room for the top half to hinge on the flex pipe. Included in kit is everything you need to bolt it in your mini. Mounting turbo to header is a bit difficult tho. Kit includes.. custom built Down pipe. custom built Header. Wrapped in DEI titanium heat wrap. Turbonetics 50 Trim Turbo 350HP. Bought used with 3,000 miles. Precision Turbo PW39 External Wastegate. Brand new. Turbosmart vee-port Blow Off Valve. Brand new. -10 AN and -4 AN oil lines and fittings. Silicone couplers and T bolt clamps. 10FT 4mm turbosmart vacuum hose. Gaskets.
What sort of ECU tuning would have to be done to get this to play nice with the supercharger? What about larger injectors and perhaps an overboost injector? Does this boost thru the intercooler too, or not?
The only tuning I was going to do was with an apexi neo which is a fuel tuning device. I can throw it in for $250 more. And yes it boost through the intercooler.
Mr. Wildebeest can tune it, I can provide a larger-than-stock supercharger pulley--you're so close to 300 WHP...
Bump price drop $1,800 OBO need to get rid of this for other things. Had a guy make a deposit and it was sold for $2,800 but he backed out:mad5:
What would It cost to tune this just trying to look at total cost for all associated parts before I try to pick it up