Engine Drivetrain 1st Gen Cooper S Oil cooler adaptor plate

Discussion in 'Tuning and Performance' started by 1r53, Jan 10, 2011.

  1. 1r53

    1r53 New Member

    Dec 21, 2010
    52
    1
    0
    Ratings:
    +1 / 0 / -0
    I was just wondering if there is a vendor that sales just the adaptor plate for an oil cooler. I have 2 or 3 Setrab oil coolers, lines and fittings so I really dont need an oil cooler kit. Just figured I would put one in while I have everything out.
     
  2. quikmni

    quikmni Moderator

    Jun 6, 2009
    774
    174
    43
    Aerospace Engineer
    Orcutt, CA
    Ratings:
    +174 / 0 / -0
    I beleive that Mini Mania sells just the plate for about $100.
     
  3. minimark

    minimark Well-Known Member

    Jun 24, 2009
    5,146
    1,302
    113
    Winston-Salem, NC
    Ratings:
    +1,302 / 0 / -0
    Sneed's Speedshop has a oil cooler kit and I'm pretty sure Chris will sell just the adapter plate...
     
  4. Nitrominis

    Nitrominis Banned

    May 9, 2009
    1,217
    61
    0
    Doing nothing
    Santa Cruz, CA
    Ratings:
    +61 / 0 / -0
    George at Mini Madness will sells his alone as well.

    You can easily make one with some aluminum and copper or AN fittings and a jig saw. All for under 50 bucks.
     
  5. minimark

    minimark Well-Known Member

    Jun 24, 2009
    5,146
    1,302
    113
    Winston-Salem, NC
    Ratings:
    +1,302 / 0 / -0
    Yep and George's is anodised red...got to be worth a couple more HP!!!
     
  6. minimark

    minimark Well-Known Member

    Jun 24, 2009
    5,146
    1,302
    113
    Winston-Salem, NC
    Ratings:
    +1,302 / 0 / -0
    RMW also has just the adapter plate available and is a very nice piece!
     
  7. Nitrominis

    Nitrominis Banned

    May 9, 2009
    1,217
    61
    0
    Doing nothing
    Santa Cruz, CA
    Ratings:
    +61 / 0 / -0
    RED colored parts always adds HP! :cornut:
    Yes MM's O/F adapter is anodized RED.
    This is mine.

    archived picture:
    [​IMG]
     
  8. 1r53

    1r53 New Member

    Dec 21, 2010
    52
    1
    0
    Ratings:
    +1 / 0 / -0
    Thanks for the info guys, I didn't think that they would sell just the adapter Iguess I Should have called around before posting a newbs ? I do like the one with the two ports for oil temp and pressure
     
  9. Nitrominis

    Nitrominis Banned

    May 9, 2009
    1,217
    61
    0
    Doing nothing
    Santa Cruz, CA
    Ratings:
    +61 / 0 / -0
    No such thing as an old question. It is turn around time with all the new MINI owners to post questions. Most of us old time MINI owners will be more than happy to answer them again!



    archived picture:
    [​IMG]
     
  10. ScottinBend

    ScottinBend Space Cowboy
    Supporting Member

    May 4, 2009
    8,767
    2,547
    113
    Bend, OR USA
    Ratings:
    +2,678 / 1 / -0
    I believe Sneed also has just the plate available.
     
  11. 1r53

    1r53 New Member

    Dec 21, 2010
    52
    1
    0
    Ratings:
    +1 / 0 / -0
    #11 1r53, Jan 11, 2011
    Last edited: Jan 11, 2011
    Whats the deal with that oil filter housing, is that what you are using?
     
  12. Nitrominis

    Nitrominis Banned

    May 9, 2009
    1,217
    61
    0
    Doing nothing
    Santa Cruz, CA
    Ratings:
    +61 / 0 / -0
    Slightly off thread topic, but

    your thread and because you asked!
    I run my own designed oil cooler system and OBERG oil filter. The two adapters are to bypass the factory oil filter and cooler. The system goes back through high pressure lines into a oil thermostat,controlled oil cooler/fan assemble back through an OBERG oil filter to the engine. The oil cooler fan is controlled by, temperature,boost, RPM and manual override. There are 3 temperature sensors and 2 oil pressure switches via a bus switch for component activation and monitoring via gauges or data logging devise. Needless to say I have a steady and constant oil temperature in most operating environments. The system has a oil pressure drop of -3/5 lbs at operating temperature and a consistent 180-185*degree temperature coming out of the sump and -175* cooled returned to engine.


    Achieved pictures:

    [​IMG]
    [​IMG]
    [​IMG]

    Achieved pictures:
    Installation picture post re-located Oberg oil filter.

    [​IMG]
    [​IMG]
     
  13. 1r53

    1r53 New Member

    Dec 21, 2010
    52
    1
    0
    Ratings:
    +1 / 0 / -0
    Nice setup. I like it :Thumbsup:
     
  14. Mike

    Mike New Member

    May 4, 2009
    403
    3
    0
    Ratings:
    +3 / 0 / -0
    Very nice. What size lines are you running for that system?
     
  15. LosOsosS

    LosOsosS New Member

    Nov 14, 2010
    21
    2
    0
    Los Osos, CA...near San Luis Obispo
    Ratings:
    +2 / 0 / -0
    The adapter plate can also be sourced from Moss Motors, i.e. mossmini.com. It is part of their oil cooler kit, but can be purchased individually. The part number is not listed, but a Moss tech will take care of you.
     
  16. fishmonger

    fishmonger Well-Known Member

    May 13, 2015
    984
    769
    93
    Madison, WI
    Ratings:
    +895 / 0 / -0
    hmm - mossmini no more.

    I've been looking for an adapter plate that has the proper connectors for oil temp and oil pressure gauges but cannot locate that any longer. I think that's what Moss used to sell.

    Perhaps I should just get the proper in-line AN T-connectors and go with an ebay cooler kit. They look ok, with all the proper parts, except none of these oil cooler kits (not even the $$$ kits at Way and other Mini vendors) come with a thermostat valve. I really don't want my oil cooler to do anything until it needs to cool, so no matter what I do, I will probably have to hack this whole setup myself from parts bought from various sources.

    Low on my to-do list, but oil coolers are shiny :)
     
  17. Dave.0

    Dave.0 Helix & RMW Powered
    Lifetime Supporter

    May 4, 2009
    25,021
    13,497
    113
    Burbs of Philly, PA
    Ratings:
    +14,644 / 10 / -4
  18. melvinyip

    melvinyip New Member

    Apr 26, 2015
    19
    3
    0
    Ratings:
    +3 / 0 / -0
    May I ask if there is a difference for this oil cooler adaptor plate between manual and auto transmission r53 cooper s?

    Most aftermarket oil cooler I see for sale are stated with a disclaimer "this oil cooler will not fit minis with automatic transmission"

    I'm looking to mod my stock oil cooler as well, sadly mine is an automatic. Not sure if there is any oil cooler which is suitable for my application.
     
  19. BlimeyCabrio

    BlimeyCabrio Oscar Goldman of MINIs
    Lifetime Supporter

    May 4, 2009
    3,532
    2,896
    113
    Professional Facilitator and Alignment Consultant
    Holly Springs, NC
    Ratings:
    +2,896 / 0 / -0
    R53 (and R52 S) manual transmission cars have a water cooling circuit through the oil filter housing. Automatic transmission cars don't have this; instead, they have a water cooling circuit for the transmission. Oil cooler adapter plates are designed to work with the oil filter housing on the manual transmission cars (which is different).

    It IS possible to replace the automatic oil filter housing with a manual one, with the integral cooler, then use this to install an oil cooler adapter plate and a cooler. It's not trivial, but it's possible.

    However, no one really needs this. Because the automatic transmission cars are limited to a MUCH lower rev limit, and it can't be increased... the transmission automatically upshifts at about 6250, if memory serves. As a result, automatics don't generate high oil temps like the manual cars. I've driven an automatic first gen car as hard as ANYONE. I dare say, as hard as it CAN BE. And never had an issue with oil temps.
     
  20. vetsvette

    vetsvette MINI Alliance Ambassador

    Nov 9, 2013
    2,181
    1,782
    113
    South Central Virginia
    Ratings:
    +1,937 / 0 / -0
    And, it even works upside down!!! I've been looking at this mod for my R56. Expensive, but with my high mileage motor it sure can't hurt.
     

Share This Page