2nd Gen R56 Cooper S Oil leak - Need help please

Discussion in '2nd Generation: 2007+ R55 through R61' started by jhp7, Jun 17, 2016.

  1. jhp7

    jhp7 New Member

    Jun 17, 2016
    5
    0
    0
    Ratings:
    +0 / 0 / -0
    Hi,

    I own a 2008 mini cooper S with 120k mileage on it.
    I noticed a few weeks ago that oil was leaking and finally took the time to take it to a dealership for inspection this morning.

    They say I have to pay $3500 to replace 4 parts and I just have no idea what to do.

    Does this look like a reasonable amount? Please help me what I need to do.
     
  2. MCS02

    MCS02 Moderator
    Staff Member Articles Moderator Supporting Member

    Jul 31, 2009
    11,163
    6,169
    113
    Male
    Ratings:
    +7,874 / 10 / -3
    Welcome to MA!!It would depend on the parts. What do they say is wrong with it. where do you live we may be able to help you find a good independent shop
     
  3. DneprDave

    DneprDave Well-Known Member
    Supporting Member

    Oct 23, 2010
    2,952
    1,500
    113
    Engineer
    Pacific NW
    Ratings:
    +1,720 / 0 / -0
    Welcome to Motoring Alliance.

    You don't give us a lot to go on. Which four parts?
     
  4. jhp7

    jhp7 New Member

    Jun 17, 2016
    5
    0
    0
    Ratings:
    +0 / 0 / -0
    Thank you very much. I'm trying to get in touch with the advisor to get the names of those 4 parts. Once I get the names, I'll post them here.

    I live in Vancouver, Canada.

    Thank you.
     
  5. jhp7

    jhp7 New Member

    Jun 17, 2016
    5
    0
    0
    Ratings:
    +0 / 0 / -0
    I'll get back to you with the names shortly. It's really hard to reach the advisor I spoke to earlier this morning.

    thanks for the help.
     
  6. jhp7

    jhp7 New Member

    Jun 17, 2016
    5
    0
    0
    Ratings:
    +0 / 0 / -0
    Actually the advisor just got back to me and told me that the following are the problematic parts: valve cover, vacuum pump, oil filter housing gaskets, oil pan gaskets.
     
  7. jhp7

    jhp7 New Member

    Jun 17, 2016
    5
    0
    0
    Ratings:
    +0 / 0 / -0
    The following are the problematic parts: valve cover, vacuum pump, oil filter housing gaskets, oil pan gaskets.

    Thank you!
     
  8. Metalman

    Metalman Well-Known Member
    Lifetime Supporter

    Sep 29, 2009
    12,713
    7,659
    113
    Ex-Owner (Retired) of a custom metal fab company.
    Columbus, Ohio
    Ratings:
    +7,913 / 1 / -0
    Well..... Are you mechanically inclined?

    Oil tends to run downhill except for when the air currents blow the oil in strange directions around the engine....

    I would start with the valve cover... that is the highest point and was probably damaged by the heat off the turbo and warped the sealing flange....... Ballpark price $350 USD W/O labor

    I find it kind of strange that they claim the vacuum pump is bad or related to the oil leak.... But I suppose it could be defective. It's a sealed unit so not sure how it contributes to oil leaks..... Ballpark price... $250 - $300 USD. W/O labor

    The oil filter housing gasket sits between the oil filter frame and the engine and the oil cooler..... They are known to start leaking around your mileage. Ballpark price... Ballpark price for both.... $50 USD W/O labor

    MINI stopped using a oil pan gasket and have moved over to a Loctite RTV product.... Ballpark $35 USD W/O labor

    Most of the price they quoted you is for labor... You can reduce the hurt if you can do it yourself.... Your labor is free... Right? They have to charge for it...

    If it was me I would start with the valve cover and see where that gets you. It's the easiest to get to. Everything else is going to be a pain to work on. Probably pass on the vacuum pump replacement (are your brakes acting soft? The vacuum pump assists the brakes).

    Anyway... My $0.02 USD W/O labor
     
  9. Zapski

    Zapski Well-Known Member

    May 4, 2011
    2,099
    889
    113
    Columbus, OH
    Ratings:
    +938 / 0 / -0
    Sounds similar to a massive leak I had a couple years back on my 2008 S. I paid less than what you've been quoted to my dealer, but not a whole lot less.

    On the plus side, I've not had any major issues since.
     
  10. caseydog

    caseydog Well-Known Member

    Nov 7, 2012
    2,433
    879
    113
    Automotive Photographer
    Dallas
    Ratings:
    +1,059 / 1 / -0
    #10 caseydog, Jun 17, 2016
    Last edited: Jun 17, 2016
    My 2007 CS has had all of those leaks, and more, so I can believe it. The valve cover leaked twice in two years.

    Mine was covered under an extended warranty, so I only paid $100 deductibles for repairs. MINI paid for the second valve cover leak. However, I did see the repair costs, and IIRC, that sounds about right.

    I would look for an independent garage to do the work. The dealership is usually the most expensive.

    You can also fix leaks one at a time to spread out the cost. Fix the worst ones first. Some of those leaks may just be seepage right now, which buys you some time.

    On plus for the MINI dealers is that they will warranty their repairs. Ask any shop you contact if they will do that, and for how long. Many will, others won't.

    CD
     
  11. Metalman

    Metalman Well-Known Member
    Lifetime Supporter

    Sep 29, 2009
    12,713
    7,659
    113
    Ex-Owner (Retired) of a custom metal fab company.
    Columbus, Ohio
    Ratings:
    +7,913 / 1 / -0
    If you go with an independant shop, pick one that's familiar with MINI's.... They aren't your grandpa's Buick...

    You might want to consider clicking on the "Sponsor" button in the header above and find an independant MINI's shop close to you.

    http://www.motoringalliance.com/forums/vendor/list-by-alpha
     
  12. DneprDave

    DneprDave Well-Known Member
    Supporting Member

    Oct 23, 2010
    2,952
    1,500
    113
    Engineer
    Pacific NW
    Ratings:
    +1,720 / 0 / -0
    Just Google, Vancouver BC mini cooper repair, and you'll get a list of MINI specialists with customer reviews.

    They all go by the flat rate manual, so the hours it takes to repair things will be the same. What you want to do is ask what their shop rate is, that is what they charge per hour for repairs.
     

Share This Page