1st Gen JCW Clutch pedal wiring

Discussion in '1st Generation: 2002–06 R50, R53 & 2004–08 R52' started by Kenny kustom, Feb 6, 2015.

  1. Kenny kustom

    Kenny kustom New Member

    Jan 24, 2015
    297
    178
    0
    Ratings:
    +178 / 0 / -0
    Wondering if someone can look at something for me.
    I am in the process of installing cruise on my 06.

    If there's anyone with cruise, manual trans, could look at their clutch pedal and tell me how many wires are coming out of it?
     
  2. Eric@Helix

    Eric@Helix New Member
    Motoring Alliance Founding Sponsor

    May 4, 2009
    1,154
    1,257
    0
    Shepherd
    Philadelphia
    Ratings:
    +1,257 / 0 / -0
    That magnetic pickup? It's four.
     
  3. Kenny kustom

    Kenny kustom New Member

    Jan 24, 2015
    297
    178
    0
    Ratings:
    +178 / 0 / -0
    Yea.. Thats what i was afraid of.

    See, i only have three wires coming out of the clutch slave on the pedal.
    I am unsure, if when factory equipped with cruise, there is another switch on the pedal, higher up. Or, do they use more wires out of the slave. ?
     
  4. Kenny kustom

    Kenny kustom New Member

    Jan 24, 2015
    297
    178
    0
    Ratings:
    +178 / 0 / -0
    Another nail in this coffin project.
    I have a whole steering column from another mini that had cruise. I intend to swap the buttons and clock spring over. But, the wiring for the cruise, on the back side of the clock spring is not present on my car..
     
  5. Kenny kustom

    Kenny kustom New Member

    Jan 24, 2015
    297
    178
    0
    Ratings:
    +178 / 0 / -0
    The donor column has 6 wires coming out of the harness on the clock spring.
    Mine has only two. Looks like some wiring is in order !
     

Share This Page