Camera Mount

Images of my home made camera mount

Sort By: Date

Sort By...

Filters

Type Filters

Fully installed. I was able to move the seat far enough back so that the bracket will not cause any driver interference. All told, the cost was ver
donaldj

donaldj

Camera Mount
0 x

Fully installed. I was able to move the seat far enough back so that the bracket will not cause any driver interference. All told, the cost was ver

0
875
0
0
07 May 2009
As seen from the boot. With my particular video camera, I get decent coverage of the front window and the speedo.
donaldj

donaldj

Camera Mount
0 x

As seen from the boot. With my particular video camera, I get decent coverage of the front window and the speedo.

0
834
0
0
07 May 2009
As seen from behind the seat. This is definitely not a "quick release" type. I was able to move the bracket up high enough so as not to interfere with
donaldj

donaldj

Camera Mount
0 x

As seen from behind the seat. This is definitely not a "quick release" type. I was able to move the bracket up high enough so as not to interfere with

0
894
0
0
07 May 2009
The fastener I used was a 5/8" "cable bolt" found at Lowes. It consists of a U-bolt, the cable cradle (which fits the headrest bar perfectly!), and 2
donaldj

donaldj

Camera Mount
0 x

The fastener I used was a 5/8" "cable bolt" found at Lowes. It consists of a U-bolt, the cable cradle (which fits the headrest bar perfectly!), and 2

0
891
0
0
07 May 2009
This is the final product. I coated the angle iron, the cable bolts, and the cable cradles in spray-on rubber coating. The camera mount is a Bogen Man
donaldj

donaldj

Camera Mount
0 x

This is the final product. I coated the angle iron, the cable bolts, and the cable cradles in spray-on rubber coating. The camera mount is a Bogen Man

0
835
0
0
07 May 2009
donaldj, May 7, 2009
    There are no comments to display.