Separate names with a comma.
I know it's been a while but this project has not died, I just had to put it aside to complete some other work. I build transmissions for Sprites,...
Nothing to report, finishing up some work on other projects first. I rebuilt a GT6 gearbox - twice - as one of the parts we put in failed. I've...
At the car show last Sunday, some "helpers" were pushing the Innocenti back into alignment with the other cars and as I was steering it from the...
I still haven't gotten the car out of the garage as I'm having trouble co-ordinating with strong/younger neighbors to give me a hand (one's wife...
Absolutely. That's why I want to get the rust cut out and repaired before I cut the big hole in the back. I'll brace up the rear first....the...
At today's Heartland All British, the Inno won 1st place in its category! Of course, there were only 2 classic Minis there out of 120 cars that...
I had to pause my bracket making when I realized that if I set the tank all the way down in the subframe, the pipes for the coolant wouldn't clear...
Today I'm making brackets and such to weld in to mount all the stuff in front.....to that end I got to use a new tool today! I needed to remove...
who's lifetime tho? :cool:
This engine, in addition to being turbo charged and direct fuel injected, also has variable cam timing, so you have cam position sensors and cam...
Today's project was to get the engine settled on the hydraulic table and remove the engine electrical harness......which was a total PITA! But I...
New radiator and A/C condenser appeared, so for the umpteenth time I bolted the front subframe in again and mocked up the locations. It looks like...
I mounted the front subframe back in the car and cut a piece of 1 1/2 angle to act as the bottom mount, then set the tank back in. Fits perfectly...
Tank is done and back from the welder's....it came out well. In this pic the round dealybobber is the fuel filter/pressure regulator. Fuel comes...
Since the big shed got finished I spent a day moving stuff into it from the small old shed, and then spent a couple of hours cleaning the mouse...
Hi Don, I HAVE been busy, but not too much on the Hot Rod. i built a 10X16 shed in the backyard, so I could clean out the small shed so I would...
Couldn't find anyone to do that, and this one was priced right at $120 including the sending unit and cap.
I've been working on my fuel tank, I cut the end off as I knew it had to be shortened to fit in the front end (by my calculations I'll have right...
I haven't seen the video yet, but the engine I bought also uses the belt that runs in the oil...... Edit: After watching the video it's clear...
Buncha stuff showed up yesterday, a box full of panels and later my gas tank. I got new front floor pans, door step, both sills, all the repair...