Separate names with a comma.
We are out of R53 springs at this time. [email protected]
Here are a few comments on your questions. The Vorshlag/TSW front camber plates make a hug difference in the turns, keeping the MINI very flat....
We use custom made bushings that have a teflon mesh material imbedded into the inside of the bushings. The bushings and brackets are much larger...
We used H-Sport as well until we made our own 19mm rear sway bar with several improvements. It is manufactured by KW as a TSW private label to...
The TSW 19mm bar is one continuous piece (no welding) with extra large urethane mounts and brackets that do not squeak. KW Automotive USA makes...
I agree with your first statement, however not the second. If we limit the discussion to a stock MINI with OEM struts and OEM springs, the ride...
It is not so much the type of shock, it is the design of the suspension on the MINI. Progressive springs simply do not work well on the MINI...
We have tried both H-Sport and H&R on the MINI and both resulted in a rougher ride. Contrary to popular belief, the MINI rides MUCH better with...
There are four possible reasons for the springs squeaking. 1. All springs have +/- tolerances. Once in a while we see a spring with a slightly...
You may also be able to find a TimeCert the correct size. We used these on a stripped out spark plug and they are way better than helicoil. We...
We just got in our TSW high carbon steel slotted rotors for the JCW. If you decide to go that route these are much better and less expensive than...
Cam for justacooper You might want to contact Scott at TSW ([email protected]) but I can give you my 2 cents worth. We put a Thumper head in...
We can get Powerflex durometers in soft, medium and hard (track) as a special order. These take about 4 weeks to get. Here is a section I lifted...
We have KW Variant 1 or Variant 2 you might want to look at. These are a priviate label made to TSW specifications, specifically for the MINI....
We have tried them all and Powerflex is hands down the best! TSW just signed up as a Powerflex dealer and will have our new stock of parts by the...
The other consideration for more negative camber is tire wear, especially on a daily driver. The more negative camber, the more often you have to...
MINI suspension setup We run something very similar to Nathan: Camber -2.0 front, -1.5 rear Toe neutral front, 1/16 toe in on the rear...
Texas Speedwerks (TSW) has a 19mm rear sway bar custom made for us by KW to our specifications. It has large urethane bushings with impregnated...
Intercoolers We are interested in both intercoolers for $50 plus shipping. Can we PayPal you the money directly?
Powerflex We have tried them all and PowerFlex is hands down the best.