Separate names with a comma.
Selling the injectors I never used. 550cc. 200$ shipped takes them. PayPal only. Thanks![IMG]
Where are you located? Sent from my Pixel using Tapatalk
Got a used 10k ish mile heat exchanger 40$ shipped. Cleaned and ready to ship. And 2 Akata 12mm(just under half inch) wheel spacers 4x100 56.1 hub...
Selling my 550cc Bosch injectors still in their original packaging. NEVER installed or even taken out of the protective caps. Bought these from...
Ah I see. I think any spacers that are hub centric will have a new bore to align the wheel on. That's how my katanas are. Sent from my Pixel...
Katana is also good. And I highly doubt the center bore is 10mm. That's the diameter of the ring around the axle nut. You want hub centric but any...
Cars alive. However I had a bad exhaust leak so I got that fixed. Installed a Bosch o2 sensor. Big mistake, car couldn't get a reading most of the...
No. Shop accidently bent oil squirter. Luckily I saw it before putting the pan on. That's why it is off in that picture. Sent from my Pixel using...
[IMG][IMG] [IMG] [IMG] [IMG] Well pieces are back :) Sent from my Pixel using Tapatalk
[IMG][IMG][IMG][IMG][IMG][IMG][IMG] Sent from my Pixel using Tapatalk
[IMG][IMG][IMG][IMG] Sent from my Pixel using Tapatalk
Yup. I would have had my block today but stuff happens. Jan was just as surprised as I was to find out they are the r50 ones. I spoke with Chad...
Brand new in the box. One circlip was put in before the shop realized the wrist pin was a different size. Talked to Jan, he is hooking me up with...
A mistake was made and I received the wrong product. Got the base non boosted mahle pistons instead of the r53 boosted mahle pistons. Jan was by...
[IMG] Sent from my Pixel using Tapatalk
Cleaned up rods [IMG][IMG] Painted oil pan [IMG] Custom made dual pod mount [IMG] Sent from my Pixel using Tapatalk
Do they have push lock style adapters? Sent from my Pixel using Tapatalk
I wonder does anyone make any aftermarket clips that fit into the supercharger inlet hose that adapt from the plastic hoses to allow a 3/8 barbed...
While you're at it, remove your intercooler boots and check your other vacuum lines. There's one coming off the intake manifold pointing towards...
I do believe it Tees into the bypass valve line. So you'll need to remove the intake hose from the intake to the throttle body. Then just below...