Separate names with a comma.
It was the window regulator. However, after replacing it I now get a high-pitched whistle at the top edge of the window at 65+ mph. Do I have an...
I'd just bragged about how well the Mini was doing and then bam...passenger window is stuck all the way down:mad2:. The motor is getting juice...
I used the Greene Performance tank and am very pleased with the results. I wish I'd bought it to begin with instead of wasting time on another...
As already stated, choose a custom install rather than the express settings. There are multiple items to opt out of that will greatly reduce...
r34king, I'm looking for an "aesthetically pleasing" solution:) Something along the lines of a spray adhesive?
My headliner is starting to sag along the passenger side. Summertime in Chattanooga is freaking hot and without A/C (another future project),...
Tried it both ways Firebro and you're right...works best when running.
CEL with code P0128 confirmed it: Coolant Thermostat. Changed thermostat, gasket and housing and all is back to normal. Thanks for the assistance...
That's a pricey book. I'm assuming it's worth it if so many have recommended it. It's now in the Wish list:thumbsup:
I drove the car over to my in-law's home and bled/burped the system for a third time on their steep driveway. The moment I turned either bleed...
Could anyone outline the correct procedure for bleeding or burping the coolant system? Or post a link to site that has the info? There seems to be...
Not sure if it matters, but the car did overheat according to the temp gauge when the T-connector broke?
I let it idle for 15 minutes or so and it reached the normal temp...midway on the gauge. After driving it for a few miles, the temp slowly drops...
If you recall from my previous post, I broke a coolant hose T-connector. As a result, I lost the majority of the fluid. I replaced the coolant...
Holy crap what a knuckle-buster was! Had to do it the hard way with a small pair of pliers since my snips wouldn't cut the clamps from the odd...
I am not a "car guy" but I installed Colin's tank in an hour after a brief conversation with him on the phone. You will need a hacksaw, 1/4" drill...
Getting to the clamps is the issue, Nathan.
A pic on the "T".
The nipple, or "T", on the radiator hose connector that the expansion tank vent hose attaches broke off. I had the local Mini shop order the part...
I've had two OEM tanks split in a year...the original as well as the replacement. I was fortunate enough to avoid any damage but the potential is...