1st Gen R53 Cooper S Trip computer

Discussion in '1st Generation: 2002–06 R50, R53 & 2004–08 R52' started by GeorgeCo, Jun 9, 2011.

Tags:
Most Liked Posts
  1. GeorgeCo

    GeorgeCo Site Sponsor
    Motoring Alliance Sponsor Supporting Member

    Oct 29, 2009
    253
    38
    28
    Male
    Motorer
    Mt. Airy, MD
    Ratings:
    +38 / 0 / -0
    #1 GeorgeCo, Jun 9, 2011
    Where's the actual computer on an 04 MCS? temp/range/mileage

    Is it built into the tach, a separate module or part of the DME? Could I move it from my car to an 06 MCS?
     
  2. Nathan

    Nathan Founder

    Mar 30, 2009
    25,144
    10,052
    113
    Writer
    Short North
    Ratings:
    +10,069 / 0 / -0
    #2 Nathan, Jun 9, 2011
    The computer is tied to the VIN. The BCM and ECU are tied together and communicate with each other. I'm not gonna say it can't be done but it does require some fancy footwork and someone that knows the heck they are doing. Might want to contact Way or Jason (Mynes).
     
  3. mike@MynesTuned

    mike@MynesTuned New Member

    May 16, 2009
    286
    5
    0
    Ratings:
    +5 / 0 / -0
    #3 mike@MynesTuned, Jun 10, 2011
    Are you trying to 'enable' the trip and mileage display on your tach? with the proper BMW/Diagnostic equipment, this feature can be "activated" within 15 minutes. This service will have to done in person though...

    Both Way Motor Works and Mynes can provide this service. The dealership can do it too, but they will charge more than the $40/$50 that we charge, and probably sell you a 'module' with a part number stuck to an empty box. Hope this helps...
     
  4. ScottinBend

    ScottinBend Space Cowboy
    Supporting Member

    May 4, 2009
    8,767
    2,547
    113
    Bend, OR USA
    Ratings:
    +2,678 / 1 / -0
    #4 ScottinBend, Jun 10, 2011
    Yep.....what he said. Have had a few friends that did this to cars that came "w/o" the OBC when purchased.
     
  5. Crashton

    Crashton Club Coordinator

    Jun 4, 2009
    19,445
    10,057
    113
    Retired old fart
    Hooterville Ohio USA
    Ratings:
    +11,698 / 2 / -0
    #5 Crashton, Jun 10, 2011
    My dealer switched mine on for me. :D
     
  6. alwzopn

    alwzopn New Member

    Jul 1, 2010
    183
    7
    0
    Ratings:
    +7 / 0 / -0
    #6 alwzopn, Jun 14, 2011
    Is there any information on reprogramming functions on the 1st gen Minis through something like INPA/EDIABAS with NCS Expert for the newer BMWs and Minis? I've searched around a bit but I'm not finding anything more than a few cryptic references to software called SSS...would this software be able to make changes like enabling the on board computer?
     
  7. GeorgeCo

    GeorgeCo Site Sponsor
    Motoring Alliance Sponsor Supporting Member

    Oct 29, 2009
    253
    38
    28
    Male
    Motorer
    Mt. Airy, MD
    Ratings:
    +38 / 0 / -0
    #7 GeorgeCo, Jun 18, 2011
    Way is down in Hot-lanta, I think. Where is Mynes?
     
  8. Way Motor Works

    Way Motor Works New Member

    May 4, 2009
    1,169
    206
    0
    MINI Tuner
    Atlanta
    Ratings:
    +206 / 0 / -0
    #8 Way Motor Works, Jun 19, 2011
    Yes we are in Atlanta, Mynes is in California.
     
  9. GeorgeCo

    GeorgeCo Site Sponsor
    Motoring Alliance Sponsor Supporting Member

    Oct 29, 2009
    253
    38
    28
    Male
    Motorer
    Mt. Airy, MD
    Ratings:
    +38 / 0 / -0
    #9 GeorgeCo, Jul 21, 2011
    OBC, check

    Thanks for the advice. I got John to activate it last time I took it to Behe. If you have the right (read ungodly expensive...) computer, it's a piece of cake. The key was to find the right screen to activate the module then to configure it. We also went through a couple of other convenience things as well. Who knew?

    Does cruise control work the same way? I realize I'd have to buy the steering wheel switches, but is the actual control module already installed, just not active? From the parts drawing it looks like the parts retrofit would include the steering wheel stereo controls as well. Do they work with the non-HK stereo?

    Any other "empty box" retrofit kits that can be activated in software lurking out there?
     
  10. ZippyNH

    ZippyNH Well-Known Member

    Jan 25, 2010
    1,404
    688
    113
    Pilot
    Southern NH
    Ratings:
    +688 / 0 / -0
    #10 ZippyNH, Jul 30, 2011
    Nope....the Cruise control is a full retrofit...
    From what I recall, the install is pretty $$, and requires lots of work....to the point I think I remember one dealer saying they did one, and would not do another....
     

Share This Page