Separate names with a comma.
My family mechanic had reservations about installing an OBX header because of removal of the pre-cat. Who around Pgh will do an OBX install...
never mind, the part number posted above is for the standard injector....
Ok some updated information Link to information about fuel injector sizing....
Fuel injectors are rated on the pressure over the manifold. So the pressure that the injectors sees is the fuel rail pressure minus the...
BlwnAway, that would be 46-47 psi fuel pressure. I remember reading somewhere the stock fuel pump has trouble keeping 50psi fuel pressure...
What boot are you seeing at WOT? The fuel pressure would be the gauge minus the boost. -Jonathan
i figured ti would use the jcw210 flash with the larger injectors. It is inexpensive and gives mild gains. This was the injector i was looking...
If i did it I would source them from a bosh racing supplier and not ebay. Of course the JCW would be easiest. I simply wanted to know if...
Has any one tried Bosch 34lb/hr @ 3bar injectors? Based on all the calculations i could find they would flow at about ~380cc at 3.5bar fuel...
[IMG] The Jaffster shift knob, it is about even with the top of the radio. [IMG] The brass brushing i installed to remove the lateral...
I got a jaffster shift knob from bimmerworld with a helix short shifter and made an new brass brushing for the lateral movement (the taller...