Separate names with a comma.
When the MINI battery dies, it will not accept a jump. It can be push started though. Be sure to check the ground strap from the body to upper...
R53 extension tools on left, R56 on right.
Insert a screwdriver in a brake rotor vein on each side, place in gear.
The spring could be moved by hand.
Loose: sway bar mount, drop link bolts, upper strut shaft nut, strut mount, lower strut bolt, rear axle carrier bolts, exhaust hanger. If...
Sorry, not much documentation for this job, just a description. My first thought when this R52 S Cabrio wouldn't start was bad fuel. David, the...
This R52 had a full tank when the fuel pump failed. Fuel splash was imminent when the pump & filter would be removed for replacement. Prep...
Most likely there is poor contact between the window motor brushes and the copper bars on the commutator. Although cleaning the bars is easy,...
Just in case some may see higher rear SF as a one-size-fits-all solution, higher rear SF for a level highway ride does not automatically translate...
A basic tuning guide http://www.vorshlag.com/documents/Tuning_AST_Shocks.pdf An article about bump travel Suspension Bump Travel & Stack-up...
Have you filled with fuel from Costco? When the key is turned to the second position, do you here a couple clunks from the left rear seat area?...
No change, I also pressure bled the system afterward just in case.
I've installed both, the BSH is too rigid (and repositions the engine in a negative way), and inserts don't stay put; Madness poly inserts are the...
I'm only aware of OS Giken and Clutch Masters kits with single mass flywheel. If you have a link for an R56 Spec clutch (not for the dual mass)...
The Broken Belt MINI Returns This MINI has always been low, but when it drove up for maintenance, it was riding the bump stops. The middle coils...
The dirty springs are fake Tein S-Techs.
Please share the link to an aftermarket single mass flywheel, with compatible pressure plate, clutch disc, and release bearing for an R56.
This info is not related to heavy steering feel. From an installation perspective the best you can hope for when installing poly bushings on...
Fluid loss; a tube could have pulled away enough to leak. Easy to verify reservoir fluid.