Separate names with a comma.
Press sport button on 2nd gen cars. Or go with an aftermarket exhaust
Thermostat housing/ assembly
ISIS is only needed for idle adaptations. shift point adaptations are done in the car like they showed at the beginning of the video and can be...
Oil change on my r53. Megan racing cat-back on my wifes r50.
That looks pretty worn. Take the intake pipe off of the compressor side and wiggle the shaft. If there is play in the shaft you will need a new...
Sub frame must be pulled to replace clutch
is there fluid in the reservior
The r56 throttle is bolted to the intake manifold not the head. I believe the piece he is looking for is the plastic adapter on the core support...
R56s front brake upgrade to my 05s. Steel braided lines(thanks way). Easy job, got both sides done and bled in about 20 mins. Fills the rims very...
Welcome to the insanity. From one r53 owner to another
Remove the screw from the bottom side and close the hood. Then pull up on the scoop
Yes the air filter lid would be the culprit there
My best guess would be either 1: cheap part or 2: too long between oil changes deteriorating the material
If it is hissing when you turn the engine off I can almost guarantee its a bad valve cover. There is a little orange disk on the under side that...
Glad I could help
Is your check engine light on. If so get the codes read and see what direction takes you. But I'd lean towards the hpfp. Or possibly carbon...
if this is in the wrong section please move, though it would be the best place to put it. so i recently installed a mini fini sport link II on...
The control arm bushings can still go bad. I'd look at those first then the motor mounts. After having an alignment done properly
Installed a set of m7 strut tower defenders
I see nothing wrong other than I don't own one