Separate names with a comma.
On a lot of coilovers the way that you adjust ride height is by raising the lower spring perch. When you do this you are putting load on the...
Thanks Alan, where are those measured from? the jack points?
I will see what I can do. The drop on the KW's for the R56 is pretty severe without preloading the springs some. How much rake would you...
I have the TSW KW V2's and there is a fairly large amount of preload on the front. I did that to try and remove some of the rake that is in the...
So will a larger front sway bar help keep the inside wheel planted when cornering? I currently have the problem of the inside wheel lifting almost...
Your dead inside. :)
That is hilarious!!!
No idea on the weight. My car weighted 2612 without me in it before I had the roll bar. I unfortunately did not weight it immediately before...
Mostly likely I will be leaving the weave. I removed the transmission as well as the OS Giken flywheel. Now I need to have the alignment hole...
I generally equate the amount of smoke with the amount of carbon being burnt off. There is zero science in that believe, it's just how I figured...
I didn't pull apart the valves, I left that for Endyn to do, so I am not really sure how they look. There was a small amount of carbon build up on...
In the future, you might consider not putting seafoam in the tank. One of the reasons the R56 needs seafoam is because the valves don't ever see...
I would encourage people to see what the RPM difference between gears is. I have an R56 so keep these numbers in mind. In most cases you will be...
Nicely done!
I do 30+ track days a year, normally 4 sessions per day. Out of those 120 sessions and countless laps and shifts, I might hit the rev limiter a...
I for one am happy that Vettel was not able to maintain P1. I think the stupid chopping of drivers on the start is unsportsmanlike. I understand...
Out with the engine so that I can pull the Giken flywheel and have an alignment hole added: [IMG] It's kind of a mess in there, I will tidy...
On the R56 there is a difference between the inboard pads and the outboard ones. The inboard pads have more of a circular shape in the center of...
Can't you modify that as a supporting member?