Separate names with a comma.
The ST kits are 330 x 28 (or 12.97 x 1.10) vs the TCE Plus 4 at 13.1 x 1.10 actually. Both are about 14lb castings. The P3 at .810 (or optional...
Edited to new post.
As long as it's the stock size rotor Don. Doesn't matter who's just 294mm or the alternate 320 (?) JCW parts. I have brackets for both.
The R56 DynaPro 6 Caliper kit- $659 * Wilwood DP6 calipers (6 Piston) * TCE steel mounting brackets * BP10 pads...
Appreciate the pad on the back... Good for a physical addy; that helps. Not a 'laptop' retailer. The issue of Chinese junk however is a tough...
I'm not a Hawk hawker so I'm not biased here but that comment is a bit short sighted. You're referencing one compound that you found didn't work...
I won't deny there's some truth to the comments above. Certainly tires can be a make it or break it issue with a BBK. However don't over look...
If anyone purchases these and needs assistance with parts or installation I'll be happy to help.
I've accumulated a vast number of rotor images over the years. Here are a few: Rotors pictures by ToddTCE - Photobucket
Glad it went well. The only thing I'd add here is that it is not necessary nor really advisable to split the caliper. Wilwood uses a threadlocker...
Going to leave this open through the month or until I've sold the sets I have on the shelf. Don't wait too long, that are not that many of them.
No Wilwood pad (nor any other that I know of for the caliper) comes with wear sensors. Yes the DP6 will fit under a 16" wheel. The combo however...
We might be able to work something out. Obviously not a UPS shipment as I had planned to include but USPS can work and probably at a good...
A 13" kit will never allow one to fit a 16" wheel. No way, no how, the rotor and caliper are at too high a radius. As for the grinding, no pics...
Hey 12.2" kit owners: Get ready for the season with a deal on some new 'rings'! TCE has a limited stock of 12.2" GT rotors (the directional...
I think I have this solved for minsane. A stock front hose and an altered version of the R56 rear hose. Not a huge deal, they are M10 however so...
That's the banjo fitting common to the rears of the 2002 car. Later cars did not have them as the hose screwed into the caliper- hence the term...
Ahhh! Those were the ones I sent out a month or so back. I totally forgot about those. They should be significantly beefier for your needs.
Here's my .02 on this rear pad question: forget about putting 'track pads' in there and get a rear rotor kit. The problems associated with the...
I now have a fairly full Service Parts page on the web site for most Wilwood calipers. This includes pad clips, cotter pins, pistons and much...