Separate names with a comma.
I'm going to rub their nose in it until they wish they never screwed with me, I'm going to make life miserable. If the BAR complaint doesn't yield...
Almost 2 years ago I had my timing chain and all components replaced by my Mini Dealer, with my 2-Year/Unlimited mileage warranty ending on June...
It seems he's creating a third thread over here. I don't think he values our opinions.
What you're seeing is staining in the aluminum, it looks black because it's stained. Option 1, clean it manually, option 2 have it blasted clean...
I talked with Jake at Ohlins in NC and he said to use my go-thru ratchet/sockets to tighten the strut nuts and to check the torque as I turn the...
If I'm understanding this correctly I can get an 6mm hex drive (1/2") onto the torque wrench and hold still the 17mm nut, the torque wrench should...
I don't understand what you mean by does the go-through 17mm socket work? The rear shock nut is 17mms and fits in the 17mm hallow socket just...
I received my Ohlins coilovers and will post pictures later, right now I'm trying to determine what size nuts these came with. The smaller of the...
I didn't know that, it's only one lifter that going bad and not all of them. How would I even go about checking if the oil pump is working...
Getting the Ohlins install is the easy part, torquing the strut nut is another. In my OP I mentioned that I purchased a go-thru ratchet set, this...
Don't know how I missed you post. If I was to guess I would use my go-thru ratchet set to approximate 30 ft-lbs, not a bad idea until I get the...
I wish I had a high powered laser. I'll know more when my Ohlins are delivered today, like what the actual size of the two strut nuts are.
Maybe I don't understand you guys that well as I lack imagination, all I understand is when torquing both the M14/M12 top nut is I must have the...
I heard the noise again this time it was a little louder and coming from the valve train, I could clearly hear a cam lobe slapping against what...
2007 MCS My Ohlins Road & Track coilovers arrives tomorrow and I got myself in a pickle. Today I purchased a Craftsman 20-PC Go-Thru Ratchet set...
A year ago my entire timing chain tensioner, chain and guides were replaced, the noise isn't coming from the timing chain area, it's coming from...
This knocking noise (above cylinder head) only happens after the car has been driven for 20 or more minutes and occurs 1 out of 10 times, I can go...
My results are quite different after using BG's Engine Performance Restoration added to my oil and revving engine at 1500 rpms for 10 minutes...
Would I cause any damage while idling with the electrical connector disconnected from the vanos? I promise to record the noise next time it gets...
Lets rewind back to when I first started hearing this tapping noise in June, at first it was loud enough to easily hear from across the street, it...