Separate names with a comma.
Ian has been running the RMW meth kit since before Homestead. I believe the car hadn't yet been tuned for the RMW parts before Homestead where he...
Ian had a few new goodies in the form of the RMW Head and RMW Race Cam this weekend.:devil: If the table was already tilted before it is more so...
Ian was at it again this weekend running a 1:39.4 in traffic at Road Atlanta. He beat the old record by 2.5 seconds and the nearest competitor...
There's many people, including folks who sell them, saying they use them with no issues. I've seen half a dozen motors with spun bearings due...
Jeez, sorry to get you all worked up Roach. I thought when it said TTC at the top of the video and I said he beat the two classes above his it...
The class is at the top of the video, TTC. He also beat the TTB and TTS cars for the weekend. This was done in over 100F temps, the consensus...
Here is a video of the record setting lap at Sebring last Sunday. Ian Stewart of Maitland Imports in Orlando drove the MINI to a 2:32 time...
You will not typically get near the amount of cooling directly on the hubs with this approach as with a proper duct from a high pressure area on...
The problem with the ducts I've seen is the functionality. From an aero and pressure point of view, too many kinks in the duct reduce the...
I have given serious thought to tearing the top and all related items out, rear seats and roll bar out and putting a speedster style cover over...
I apologize for the embellishment, 30 minutes if he takes a smoke break, 45 if he orders in Armenian sandwiches.:D
I did not say the cam was installed at that speed each time. I am familiar with the Bentley manual and can assure you it is done properly. I...
I got 3 times the wear out of the first set of GSD3's and they were at least twice as good, go figure. I was just about set on the 615's, then a...
I forgot you we the self-anointed king of cams.:crazy: So it takes you 15 minutes of fondling the new cam before you raise the hood?
This is good reference, everyones opinions on tires is a bit different. My first set of GDS3 in 215 45 17 stuck like glue, the current set feel...
It should be a reasonably straight forward install for whoever you go with. I'm sure it will time them a bit longer, but for reference, from...
Good thing those guys aren't trying to horn in on my patent pending Tri-state Fragistat or I'd have to add their names to the pending litigation.
I guess the edit function is broke I noticed you said 10mm, not sure about those. H&R has everything else. Good luck.
Turner Motorsport here: Turner Motorsport: Search H&R are the only ones I've found that are quality hub centric. Using the 5mm to clear the...
If you didn't have anything else in the OBD port it couldn't hurt. It's easier than dragging my laptop around but then all the data is captured,...