Separate names with a comma.
I began with factory 195/55r16 conti ssr runflats but they had marginal performance and a short life span. I then went to 195/55r16 yoko yk580s...
I would love to help with a shop recommendation, but I do most all of the work on my MINI myself..... Partly because it's fun, partly because...
mrntd, Thanks for the heads up! I'll check out the classifieds section.
Thanks for all the tips! Cristo, I'll try to roughly zero the toe before I drive very far to the alignment shop! On a side note, are there any...
I plan to get it aligned within a day or so of the installation, but appreciate the info so I don't freak out because or poor handling during the...
I can live with a 1/4". Much more wouldn't look right. It sounds like FSD's are going to be my best bet. The lifetime warranty seems reasonably...
Thanks all for all the great info! How much will the IE fixed plated raise the front end? In regards to a special alignment? If the camber...
Also, how's the turn in with the FSD's? What about the nose dive on braking and rise on accel? Does it corner pretty flat? Should I cut down...
Thanks for all the info! It sounds like FSD's are probably the way to go. Will I loose any performance? Will I loose the feel/feedback I get...
I'm have approximately 110K miles on the oem struts/shocks on my 2006 r53. As I'm sure you all can guess, the ride quality and handling have...
Thanks! The install was pretty straight forward and very reasonable. I made sure not to touch the clutch peddle nor to disconnect the slave...
Thanks guys! Went ahead and ordered it and hope to put it in this weekend. Any things to watch for or is it pretty straight forward? Also,...
Noticeably different in what way? Simply lighter or different in another way? Not as dampened in regard to pedal feel or vibration?
Polk do does offer 4" speakers. They actually have a pretty wide Variety of speakers sizes. The rest depends on the type of music you listen...
I upgraded the audio in my MINI(r53) with polk DB's, mounted a kenwood xr-4s amp in a void under the driver seat and found a kenwood deck that...
I had the control arm bushings replaced with factory units 2 years ago. Is it still worth going to poly bushings now or would you wait for these...
How much addition NVH does the valeo kit add? Do you see many replace a failed dmf with a new dmf, or is that like asking to tear your MINI down...
Over the past week or two, I've noticed my 6spd r53 begin to not want to go into gear and through some basic diagnostic determined that the clutch...
I'm planning on sticking with stock ss+ springs, at most would look at jcw springs(or equal drop) as I drive in areas, around once a week, which I...
Wow, didn't realize how old this thread was. Might should have started a new one....