Separate names with a comma.
FIRST... it is a FEDERAL LAW!! ALL the states are required to meet the US Federal Emission Laws. !! However... IF , for the track, you pull...
Welcome to MA.. Car looks great.. and I agree.. is the steering wheel on the wrong side?? ( dont you love the American humor..."wrong side"...
There are NO good lowend cams out there.. MOST of the aftermarket cams are for higher mid and topend. The NS1 cams were designed just for that...
Nitrominis is right.. the best place is the water jacket between the cylinders. the Plug is on the back of the block , drivers side.... ( lOL...
Rocking on the NS cams .. Way will do you right. Just me...................... Thumper
MINIMARK, as you know... the higher the rpm the faster the pistons are moving , which pulls in more air, and when restricted into a intake runner...
This is why Velocity is a KEY in a ported Head and intake. If you notice the roof of that port is raised, as most the air flow is on the roof.....
Actually Dave, that isnt correct. IF you allow more air in a n/a engine ( say 15%) there is a bennifit.. and the same bennifit if the engine is...
Yep... Czar took the picture.. all the used heads I have been doing reek, and HIS picture was rocking!! Thanks again , Czar!! Just...
No hi-jack.. more like Hi- Chuck!! LOL It would seem to me that the more air flow would need to have the a/f changed. Will the stock inj...
SOOooo.... when it is time for the mods to get started, just remember that the HEAD intake Throat (among other places) might be leaving some...
Here is a shot of the INTAKE Throat just befor the valve seat on an r56 cylinder Head. As you can see almost 1/3 of the throat is BLOCKED by...
:beer Thumper
NATE !! what is this... you leading the band now?? Thumper
yes.. just thought I'd throw it out there!! Thumper
HMMMmm.... No interest?? Thumper
I went one-ball on my MINI's.. gain in hp was about 3. the sound was great!! and MPG increased a a few!! Of course with more 'sound' the gas...
I have been talking with more than a few overseas owners that seem to be wanting to build a 7800-8000 rev high compression r50 for the track and...
says it all.... I think it says it alll...... No should a - could a - would a !! Just pure data!! Thanks Mynes!! Y'all Rock!! No...
"torque specs and sequence, cause the bentley manual doesnt give you jack, thanks. " Well other than Being WRONG ( specs directly from the...