Separate names with a comma.
28% CFM flow increase from ENDYN port work.
A degree disparity in front camber is significant and more than tolerances allowed from the factory. The nubs RonsMinnie mentioned will only...
The supercharger does not spool like a turbo, its rpm is fixed to engine speed. Boost begins around 3500 rpm (depending on SC pulley size) when...
If "leak from the middle" means coolant was escaping from the seam on the expansion tank, then the tank should be replaced. The MINI coolant...
Here on MA Crank Pulley Removal Tools - Motoring Alliance Gallery
Panda aka Topless Oreo :: 2003 MINI Cooper S (2009-07-31 23:08:15)
I doubt many R56s would have this much oil in the intercooler if they were healthy. I think its location does lend itself to oil accumulation and...
Here's a photo of the parts in discussion. [img] There are two red retainer collets, one for the MAP pipe, and the other for the brake...
Supercharger intake duct with MAP pipe and red retaining collet. Below is a segmented duct used for fluid diameter analysis, and thermal testing.
There is a tab on the end of the supercharger intake duct a retaining bolt screws through, however, the symptom of a poor fitting profile gasket...
It's hard to tell for sure, high EGT is apparent, but as for the exhaust manifold the crack could have been the result of a casting fault. The...
If you prefer "several months" rather than "almost a year",OK; October 16 was the date.
An aggressive aftermarket tune was on for almost a year; recently detuned, and AP stage 1 loaded a few weeks ago.