Separate names with a comma.
Another approach to replacing the inner boot on the passenger (right) side, while on your back. Pop the tie rod ball joint, unbolt the outer ball...
$60 shipped in the contiguous US. This is used and incomplete. A section of box trim for the top, mounting hardware consisting of two sheet...
Fuel Filter Change - Lone Star Mini Club Forums
I don't think many CVT owners are aware of how important fluid maintenance is. Half the potential problems can be avoided by maintaining fluid...
NAPA stocks Pentosin CHF 11S
OEM front lower control arm replacement, out with the old, in with the new, and a modified strut spring tool to R&R the control arm. [img]...
I modified this strut tool to remove and install the front control arm from the OEM bushing.
There was a knock that seemed to be coming from the transmission, which turned out to be from the flywheel instead. The flywheel has a sprung...
This flywheel has a sprung hub to absorb drive lash, unfortunately it failed causing a knocking noise.
Thank you for your concern. I can't say I'm safe due to the conditions, but no fires are threatening nearby.
Slight contact with both wheels at full droop is not a problem. If both wheels are catching air while in operation the potential for a problem...
I'm just getting started. [img] This poor thing had more problems than slipping.
Just a peek
Another CVT trend, cracked & leaking transmission mount. [img] The mess from torn driveshaft boot. [img] [img]