Separate names with a comma.
A trend is forming, early model R50 CVT with non-belted hydraulic engine mount. [img] The other CVT engine suspension mounts tear...
A trend is forming, non-belted hydraulic engine mounts for the R50 CVT separate completely. The other engine suspension bushings tear at lower...
Allen hex
I'm sorry I missed this question terry. The OS release bearing is only compatible with OS Giken clutch kits. It is the same release bearing as OEM.
1/4 inch drive allen socket (stubby), 4 inch extension with 3/8 adapter & ratchet in the photo (the bolt was over-tightened previously), a six...
[img] [img]
Any time a torque angle is specified, use new bolts. The original bolts can be measured for stretch against a new bolt, but because bolts can...
You have another problem. The VAG modification does not cause those symptoms.
I interpret that retraction as you don't think the VAG mod affects boost, but you also site claims it causes more boost; another contradiction...
The spring was once the only difference, all MINI DV models are currently the same, regular S and JCW. The VAG modification does not cause the...
The VAG components employ a stiffer spring also. The hot air is on the turbine side. Heated air on the compressor side is a relative function...
https://axwaresystems.com/axorm/files/SASCA/e08-aug2011sum.html
Quite the contradiction, the waste gate will ensure targets are met, but power suffers.
Hardbound, yes.
Changing oil too frequently can be damaging also. New oil is acidic, later in its used life it becomes more base, and later still a swing back to...
If the gasket repairs are only because of weeping, and not full on leaking on the floor, they can be addressed later, or just ignored. Tower...
On my car, 15k is too long for an oil change. Significant amounts of fuel accumulate by 8k miles based on professional oil analysis. The first...
Headwork has a three to five week turnaround, if it is for an application programs have been written. Engine build time is largely dependent on...
The majority of the machining is CNC. A jig made specifically for the R56 from huge solid billet holds the head precisely while the work is...
I'll take a guess and say you can remove downpipe etc. and snake it up and over, if the radiator support is moved far enough out. It may be...