Separate names with a comma.
Finally a hot-rod task on this job; bench install of a reduction pulley. [img] [img] The pulley was perfectly true, that doesn't always...
This install was perfect in all corners.
Surprisingly the disk was OK, glazed, but OK. The pressure plate and flywheel heat ring only had one high side, and wear was normal. The...
158,000 miles on this OEM flywheel & clutch. The clutch release bearing failed, the disk is glazed, but only one high spot on the pressure...
30,000 miles on this fluid cocktail blend of Silkolene Syn 5 and OEM.
Low mileage unknown fluid. The gear box lost its 2/3 synchro due to a sezed clutch.
The bell housing bolts, including the starter, were way over tightened on this car. I broke a socket trying to remove the hardest to access bolt...
@158,000 miles
This bell housing bolt was over tightened at the factory, so much so the socket split trying to remove it.
This bell housing bolt was over tightened at the factory. Cramped access made it difficult to remove.
A common issue I see are rub areas on the upper radiator hose. The upper rub is caused by an edge on the radiator fan shroud. The fix is to cut...
Info http://www.motoringalliance.com/forums/cooper-s/5621-todays-job-7.html
[IMG] [IMG] [IMG] [IMG] [IMG] A good location for sound barrier placement is behind the tail lights. [IMG] The boot hatch,...