Separate names with a comma.
Mynes Tuned R56 with only a drop-in K&N filter, 25hp and 38 ft-lb torque delta. To get more out of the stock IC, a few holes in the lower trim...
Cover the input shaft splines to protect the input shaft seal when removing and installing the inner gear case half.
Apply assembly lube to the differential bearings before returning the diff to the gear case.
Torque ring gear bolts to 65ft-lb, apply second QC mark
Remove bolts one at a time in a cross pattern, apply read threadlocker, torque to 65ft-lb, apply second QC mark.
After degreasing the differential threads and ring gear, tighten bolts to 30ft-lb in a cross pattern, apply first QC mark.
Clean OE thread locker from threads and degrease.
Unfasten the noisemaker section from the intake manifold.
Loosen this nut for more wiggle room for pulling the gear box and aligning bolt hole upon reassembly.