Separate names with a comma.
The bolt on the bottom is not an original stock transmission mount bolt.
Interesting cut in the expansion tank hose on this R56. There's nothing nearby that would have caused it.
Today's Job #3 Starting a "fun stuff" job, OS clutch & LSD install (R56 JCW). But first, I have to contend with the broth past cooks have...
The majority of the oil weeping on this block came from this plug, more oil was weeping from the seam between the lower and upper case halves.
The cover was installed incorrectly allowing dirty air on the clean side of the filter.
A local gear shop says they can locate replacement parts. When the time comes, find a shop in your area that specializes in manual transmissions.
Outside of construction differences, the Torsen unit imparts a small amount of under-steer, and a minor disparity between wheels in torque...
A brake line also. This OEM Brembo is not well suited for track use. The pistons are too short, and the insulating pad on the end of the...
With the larger rotor and enough clearance within a wheel, it goes.
After tearing a second O-ring, I suspect a bur on the edge of the filter housing. [img] A swipe on the trailing edge of the indent feature...
Suspect bur causing O-ring damage.
For the parking brake cable, drop the exhaust and heat shield, pull the console between the seats; not a big deal. The problem is there is still...
Spark plug hole threads repaired with stainless steel insert, head and block decks prepped for installation. [img] [img] [img] The insert...