Separate names with a comma.
The Wilwood on the left is 12.2 inch in diameter and weighs 11lb. 6oz., the PFC R56 replacement rotor on the right is 11.5 inch and 12lb 6oz....
Wilwood's veins are widely spaced, PFC subscribes to "more is better" engineering.
Wilwood's rotor is non-floating and is fastened directly to the hat/bell with 5/16 bolts.
Single piston as evident by the impression on the back of the inside pad. Multi pistons are cool, but a self centering floating caliper like OEM...
Water spray on the intercooler is simple and it works. The delivery system is already installed, just harness the power of the windshield washer.
It could be pad kick-back, on hard corner exit flex in the wheel bearing or rotor run-out can press the pad back, so the next need for the brake,...
Fluids take the path of least resistance, so any air trapped ahead of the slave cylinder gate would not be forced out. I have the TIS and there...
kimberlein verified air can be trapped in the slave, and bleeding the slave can improve clutch engagement in the R56. A simple gravity bleed of...
Bottom adjustment knob location on the rear shock provides easy access to rebound adjustments.
AST 5100 one way shocks with Swift springs. Lower adjustment knob allows easy access and more clearance up top for additional negative camber.
This is great news! But where did this come from "excellent transportation infrastructure"; any planner try to get through Austin on I35? I...
I have them also, they're heavier than most performance tires of the same size, and because they have round shoulder construction, tread-width is...
Good catch, I've lots of distractions this evening.
I weighed the three model dampers again for the umpteenth time. ATI Super Damper 5lb 9oz Late model damper 5lb 18oz Early model damper 7lb 4oz...
Do you use a pressure bleeder? If it holds pressure then replace the cap. If it doesn't, look for a crack....
1lb 11oz less each for the PF rotors. Replacement rotors and hardware $245 each. In stock. The rotors are constructed of a special high...
According to this person, a stock R56 brake line can be used with a slight modification North American Motoring - View Single Post - R56 brakes =...
One dyno graph of a sequential primary tube pairing header in comparison with a stock header, no tune, stock head & cam. Posted previously in...
Tell us what is not real here, and provide support for your contention. Do you think, or can prove with a dyno plot, a pre-cat delete...
Yes