Separate names with a comma.
I’m puzzled by your dismissal of headwork; it sounds like you think it might result in over-the-top, unusable gains. You have a great performance...
Without the elastomer within the dual mass flywheel to help quell vibrations, the ATI Super Damper makes a whole lot of sense.
The turbo body can be ceramic coated with an ultra high temp blocker like Zirconia, and the heat shield with a more flexible silver ceramic. The...
Here is a question you asked on another forum, but I would be limited in my reponse to it over there. The cam suggestion would depend on...
He’s one of the pan-dragging crowd; he wants longer rear lower control arms for the look and so the top of the tire doesn’t rub on the arch trim....
I’m not sure exactly what you’re asking, but at your lowered position the OE bushing is at its stretch limits already. To compensate for the...
Ryan, it shows a Bavarian Autosport Bushing, which does not have a rotating center like a PFlex bushing. onasled places weights on the end of the...
It has a T-40 slot on the end, if you cut it off, it would need to be done on the vehicle or there would be no way to hold the bolt while giving...
I inspected the Capn’s camshaft failure parts and discovered the offending exhaust rocker’s roller pin was offset. Either the rocker casting...
A defective rocker roller caused mechanical spalling on this camshaft's exhaust lobe.
This manufacturing defect caused the roller to be dragged across the camshaft lobe damaging it.
Very well built, ultra precision engineering for such a harsh job.
All metal construction, sloped face, longer than stock sleeve. This thing is built like a tank (and weighs as much) compared to the stock release...
Normally it's not difficult removing the OEM pulley, early or late mode, and lightened aftermarket pulleys are a breeze pull off. My late model...
I don't feel buzz through the steering wheel anymore. Installation was simple, removing my late model OEM pulley was not.
The allen head bolt ATI provides with the damper serves as crankshaft thread protector and platform when using a conventional bolt grip puller,...
I installed the ATI Super Damper on my MCS. [img] Cool profile, too bad I didn’t line up the timing marks. [img]