Search Results

Injectors are sold as both high and low impedance... not sure which ones the gen1 mini has, but the voltages, etc specs must be around. Since...

The fact there are so many "drive by posters" who want the world on post ONE, and never give back to the community is also kinda bad...\ About...

With PSA on the verg of insolvency and a possible bailout...no big surprise here!! Just like GM, the only thing keeping PSA aflot is their...

I ran jcw380's no tune for a bit.... The computer will use the longterm fuel trims to adjust fuel flows for cruise, and light accleration with...

Misfire usually means a mechanical fix is needed...sometimes it is a plug, wire or coil issue, but often it is a valve or piston issue... You can...

Welcome! Sounds like it has some issues... +1 for making sure the engine is healthy internally before throwing parts at it... My guess is if the...

We get 5 or 6 calls a day in nh...polls, about 5 pieces of mail, adds, and nonstop adds on tv....that and now they are actually knocking on our...

On a gen1 mini there is an imoblizer...a chip the car "reads" which is in the key...no chip, no start. The way remote starters get around this is...

Remember... The purpose of a cam in increased valve duration....the longer they are open, the more fuel you can pump/suck in. Imo, once you spend...

The only size injectors you can run without a tune is 380...they WILL NOT SUPPORT your goal....limit is about 220or so HP. So you need bigger...

When choosing some parts, they are truely compermises...like cams. a race cam will make lots of hp at high tpms, but it might not be as fun on the...

The "newcrank bolt" that comes in the box with the ati does not fit the mini..... Shipping from summit was 2X MORE for 4 day ups ground $24, than...

PS Remember, when a modder says 200hp, that is to the wheels...so a tuned 200hp car is faster than a fsctory 210 hp car, since a manufacturer...

For 250 you need a healthy motor.... 240ish is more common....gets to be the limit for the internals from most of the posts i have seen, and the...

P.S When i priced the ATI damper from several vendors, prices did vary, but since the shipping cost from WMW is so reasonable, it narrowed the gap...

Swapped out mine about a week ago... Got an ATI from wmw. The removed one had not yet given me any issues, and appears to be ok, but mostly for...

Just a word of encouragement for anybody considering getting the ATI over an OEM replacement... I just had an ATI super damper installed that I...

a philips will turn them.....but with grit, age...they seem to get stuck I find if you pull them and the entire liner out with a firm, sharp yank...

Not sure how much it effects you gen2 guys, but on a gen1 car (pretuned, prejcw injectors) it was like night and day.... I can only suspect that...

The hard top "refresh" gen1 mini has dual antennas...a second one is embidded in the glass...they have a "diversity" antenna, so a shorty on a...