Separate names with a comma.
This should go on that reliability thread. "maintenance love" -Dav.0
I like the 'tude. Its yours have fun with it. I second the koni yellow/swift springs -- been extremely happy with that set up over stock OEM....
well stated Dave. The entire reason I decided to own a R53... its not the fastest car (yet) but when driven its an extension of you. You feel...
M/A = Motoring Alliance
Nice vintage! welcome to M/A
M/A is a damn good alternative "manual". I've learn quite a bit from most individuals replying so far. That and the Bentley... hard to beat.
I had a rear main seal leak and decided to R&R Dual mass flywheel set up for Valeo SMF. OEM flywheel, pressure plate look good... clutch still has...
Were you able to hand tighten the bolt that connected dog bone to shock tower? If not the dog bone is binding and likely causing the excessive...
ok here's my findings... using the same spec'd saab battery (batt #2) had the same results as the GOOD battery (batt #1) from above. battery...
Thanks for the support! Damper looks and feels ok - can't spin/rotate the metal piece with the belt removed. I believe autozone did load test...
05 MCS w/ 81k, bought it Nov 2013 and been running great up to this point. Had a similar experience as panaphobic, here:...
Way you might have just made my week. I just ordered a new gasket and oil radiator seals from you in anticipation of pulling that housing out. If...
found this: North American Motoring - View Single Post - Oil pressure relief valve I'll attempt this first then dig deeper if it doesn't work.
thanks. Its going to be a chore... tried getting in there to assess the effort. stupid tight and messy... so far.
Unfortunately I found the problem to my engine oil light :mad2: http://new.minimania.com/images/articles/filter_base.jpg Drain back plunger came...