Separate names with a comma.
I have been contemplating to open a Mini shop - then I realize I am far too anal to ever get a job done in less than 5x the specified time, so it...
My car is on jacks. Here the threads of the rear coilovers. Car runs low, but nothing rubs driver side [img] Passenger side [img][/url]
The car is back on the "work side" of the garage, after I finished the LED headlights on the daily driver. Two things to tackle this weekend - the...
Closeup of the HID/LED color temperature difference - guess some Osram CBI D2S bulbs would go better with the LEDs, but then the difference is far...
ideas- maybe fuel pump and or fuel filter. If the pump is weak and can' hold pressure after power off. To diagnose, you need a fuel pressure...
One thing to watch out for with long exposures is the "hot pixel" problem - sensor gets hot during a 15 minute expsoure. Look for "Dark Frame...
So today I turned off the lights in the garage and started aiming the headlights against the rear wall where I still had marks from my (lowered)...
I am one of their customers. My usual pattern is to rent from them, fall in love with the fancy and far too expensive gear and then I end up...
The image circle is different on the older glass. The EOS lenses have a wider body opening, which is also why Canon can have a 85mm f/1.2 and...
noisy only when uloaded? Now, there is that constant sound like something is rubbing every wheel revolution when I am on the highway. However,...
"Verdammte bushing scheisse"?
No problem - join the other 800 odd strangers :) Just to do some gear talk - here is what I have on the shelf. Most if it gets regular use. I...
Took it for a drive yesterday. Lights are not aimed correctly anymore, way high. I am worried that the bulbs are too deep in back after all and...
I usually don't post any of my photos here, since most of the things around the Minis are usually taken with my old smartphone. I do have another...
you're in Denver - check out http://diyautorepairshops.com/index.php Not sure if you'd pay the extra 50% for a technician to be available to you...
I pressed mine out and put the new poly parts in with a harbor freight press, arguably NOT a good press. Pressing them in was far easier than...
I don't buy from vendors who can't even embed a photo in the correct aspect ratio. I want my bushings to be round.
I was reading reviews on those strut mounts on Amazon recently, and almost all of them had a significant number of failure reports. That is about...
you asked for thoughts - here is what I think. Just based on what I read so far, the car seems to see a lot of "severe service" use, and it...
I have to clean up my car and take some spring 2018 shots before it's summer. Looking great. Cool location, too.