Separate names with a comma.
At today's Heartland All British, the Inno won 1st place in its category! Of course, there were only 2 classic Minis there out of 120 cars that...
I had to pause my bracket making when I realized that if I set the tank all the way down in the subframe, the pipes for the coolant wouldn't clear...
Today I'm making brackets and such to weld in to mount all the stuff in front.....to that end I got to use a new tool today! I needed to remove...
who's lifetime tho? :cool:
This engine, in addition to being turbo charged and direct fuel injected, also has variable cam timing, so you have cam position sensors and cam...
Today's project was to get the engine settled on the hydraulic table and remove the engine electrical harness......which was a total PITA! But I...
New radiator and A/C condenser appeared, so for the umpteenth time I bolted the front subframe in again and mocked up the locations. It looks like...
I mounted the front subframe back in the car and cut a piece of 1 1/2 angle to act as the bottom mount, then set the tank back in. Fits perfectly...
Tank is done and back from the welder's....it came out well. In this pic the round dealybobber is the fuel filter/pressure regulator. Fuel comes...
Since the big shed got finished I spent a day moving stuff into it from the small old shed, and then spent a couple of hours cleaning the mouse...
Hi Don, I HAVE been busy, but not too much on the Hot Rod. i built a 10X16 shed in the backyard, so I could clean out the small shed so I would...
Couldn't find anyone to do that, and this one was priced right at $120 including the sending unit and cap.
I've been working on my fuel tank, I cut the end off as I knew it had to be shortened to fit in the front end (by my calculations I'll have right...
I haven't seen the video yet, but the engine I bought also uses the belt that runs in the oil...... Edit: After watching the video it's clear...
Buncha stuff showed up yesterday, a box full of panels and later my gas tank. I got new front floor pans, door step, both sills, all the repair...
Not a lot to report on this build so far, I have the car completely stripped down to a bare shell, and I have been measuring and figuring for...
OEM, but it's been modified to get rid of all the things that would keep it from working in a non original car - things like alarm systems, door...
And the car is here......Dan brought the shell up to me (on the only rainy day we had this weekend!) and it did wash off a little bit of the "barn...
What/where are you going to race it? Drag race? Road course? autocross? rally? rallycross? drift?
There are a few of us old timers still around the site......I saw a friend notice from Nathan on FB a couple days ago!!!