Search Results

I spent most of Friday playing WII with my adult kids. Much better time spent than shopping for deals.

So with the RMW and Mynes street headers no longer available, what is a good choice of a street header? I also have a Milltek cat-back like the...

186

Since you only want a small drop in ride height, it seems like you would be better off with stiffer (and shorter) springs and adjustable shocks,...

I did not do before and after braking distance testing but I would not expect the BBK to decrease braking distances (at least until the stock...

My experience at Bob Smith MINI in Calabasas, CA is exactly the same as yours. The techs seem OK but everything else sucks. 1) 4 2) 1 3) 1 4)...

I added the larger Wilwood rear brakes not to gain braking power but to help reduce the heat and disapate the heat generated by the small pads....

Thanks Nathan. That makes sense. I do not remember having a problem holding the bolt head and torquing the nuts (or holding the nut and torquing...

Now I am confused or maybe I am just forgetting something. I have a GP so I also have the R56 aluminum trailing arms. I had the studs already...

I have a couple questions because I have a similar rear setup, 11.75 Wilwoods with 14-12 studs, and hope I am not going to have issues when it is...

+1 on the rear bar can be too stiff. From personnel experience, I can say that a 25.5 hollow bar is too stiff with camber plates for the street....

My calculations come up with a stiffness increase over a 16mm as: 2.57 times stiffer for a solid 22mm bar. 3.41 times stiffer for a hollow...

I think the confusion comes in by how the different vendors state their percentage increases and what size stock bar they compare to (16mm or...

Thanks. That is what I was thinking of doing but wanted to confirm with someone that had done it already.

Andrew, When wrapping the bar with teflon tape did you also use grease on the bushing or install the bushing dry (just with teflon tape)?

Interesting question. I always figured the plates were more to keep debris away. I would think that more air would get to the rotors without the...

The rate increases specified by vendors are also not consistent between vendors because some reference the increase from a 16mm bar and some from...

As everyone has pointed out the article is rubbish. If you use a pistol nozzle to only turn on the water flow when needed to rinse, you do not...

Remember there are a few little things that also need to be changed if you really want to add a GP wing. The rear window glass is different. The...

To deviate from Paul's suggestion slightly: Top 3 Overall: 15% supercharger pulley, exhaust, front camber plates (fixed or adj) Top 3...