caliper

So recently I had to replace my rear brake pads and realized the inner pad on the RR had about 30% more wear then the outside pad. I'm thinking...

why am I having such a hard time screwing in my rear brake pistons?

We are stocking brake caliper temperature measuring strips. These are used to measure the maximum temp that your brake caliper reaches during...

Hello everyone, I have noticed that my rear calipers are not fully releasing during my normal commute. I have read that this happens with the...

Looking for a nice used pair of Rear Brake Caliper cores for a rebuild project on my 2004 R53 MCS...if I am not mistaken the rear calipers are all...

My rear (esp. Left Side) brake makes noise as if it's dragging, especially noticeable at 15 mph with clutch depressed (less engine noise). The...

Anyone have a link to a DIY for replacing the dust boot? I seem to remember there was one somewhere on the web a couple of years ago - the first...

Just added a Brake Caliper Bushing Stiffening Kit, Anyone used Super Lube Synthetic grease instead of the recommended anti-seize?

I changed my front pads on the weekend and removed the guide pins, cleaned and re-lubed with Ultra Slick synthetic brake lubricant (as I normally...

Any thoughts on painting calipers verses putting a painted cover over them? For an 04 MCS.

So I have an '05 S and just picked up a set of calipers off a R56. After reading a few threads on the other site about the conversion I noticed...

Does anyone know the proper torque value for the front caliper mounting bolts on an R56 Justa?

What is the best way to clean up the calipers and get the rust off the face of the hub? I need to clean for now and paint later. Check out the...

Hi all, I did a rebuild on my Wilwood DynaPro calilpers last weekend and I thought that the folks on MA might appreciate having the pics, story...

Dammit, thought I got the brakes fixed, but it looks like the lower outer cylinder is leaking. Very, very slowly, but it's leaking. I rebuilt...

I combined an R56 caliper swap with Performance Friction rotors and Z pads. I also coated the pad carriers for appearance sake. Every millimeter...

New brake guide pins are called for when servicing rear brakes on 100k mile +, first generation MINIs. The bad news is these stainless steel...

So, I have an ’06 JCW car, which means among other things it comes with the JCW BBK. I only have about 20K miles on the car and after every DE,...

For a while now, I've had a loud creaking noise from my left rear brake caliper. It happens when the car is standing still, and I push and...

I finally get the front brakes sorted out (TSW BDM kit, BTSSB), put carbotech XP10's on the rears, and it looks (and sounds) like the rear...