And as for mods, I have a stock engine with a Milltek catback.
Page 1 of 2
-
BThayer23 Well-Known Member
-
Mr. Jim MudsharkLifetime Supporter
So what do you have on there now? Aftermarket header or OEM manifold? Might be easier to go with the OEM setup.
-
Given the fact that you have 92,000 miles on it and the cat is most likely if not already bad, then the fact that an OEM is so expensive.... RMW street header.
-
Metalman Well-Known MemberLifetime Supporter
- Sep 29, 2009
- 7,688
- Ex-Owner (Retired) of a custom metal fab company.
- Ratings:
- +7,960 / 1 / -0
Cut your old cat out and weld one of these in?
http://store.42draftdesigns.com/Magnaflow-25-High-Flow-Cat_p_351.html -
BThayer23 Well-Known Member
-
And better!
-
ScottinBend Space CowboySupporting Member
As has been said by the guys at Mynes.......aftermarket cat's don't last long on the high temp MINI's. Get an OEM cat and have it welded on. Check with Mynes for a price.
-
1st gen MINIs seem to be rough on exhaust systems.
If you are wanting to have the quietest option for the least $$, then get the cat that Metalman found. That looks like a decent option. -
Motoring Magic New MemberMotoring Alliance Sponsor
- Dec 13, 2009
- 266
- Motoring Magic Owner, Ventura County's ONLY MINI s
- Ratings:
- +266 / 0 / -0
we fix em
here we charge 2.5 hours (95/hr) plus the gaskets for the r&i, and the fabricator accross the street usually charges 100ish to make them look like they were never cracked-and the ones I have done were completely seperated att he crack! -
BThayer23 Well-Known Member
-
Eric@Helix New MemberMotoring Alliance Founding Sponsor
We charge 1.5 hours to remove, weld, and re-install the cat. That's a common failure.
-
Crashton Club Coordinator
^ That is a deal.....
-
BThayer23 Well-Known Member
-
Dang, must spend a long time in the reading room...lol
-
BThayer23 Well-Known Member
Those mornings are usually preceded by a head swap worth of time at the bars...
-
So what did you decide to do about the cat?
-
BThayer23 Well-Known Member
I'll post pictures when it's installed.
-
BlimeyCabrio Oscar Goldman of MINIsLifetime Supporter
- May 4, 2009
- 2,896
- Professional Facilitator and Alignment Consultant
- Ratings:
- +2,896 / 0 / -0
I wonder who is gong to install it? :cornut:
-
UMMMMM.....a mime?
Page 1 of 2