To make room for a new work station/dyno cell/optical alignment system. Our dyno cell has always been an important but underutilized space in our headquarters. We're starting to burst at the seams so we need to be more creative with space. We decided to combine the dyno cell with a new workstation and alignment center. We'll have a traditional alignment lift butted directly to the dynamometer. It will serve as both the dyno ramps and a workstation. We'll have to modify the lift to allow us to drive a car off of the back, as well as secure it when running the dyno. We'll put good use to both our welder and plasma cutter. I'll post progress photos as we go. Wish us luck!