Posted elsewhere here, but since you asked.....
Oil Temp, Oil Pressure, Boost, H2O Temp, all surrounding Tach; Scan Gauge II mounted beneath center console switch panel.
Page 1 of 3
-
Tron Chief "Need More Coffee"Lifetime Supporter
- Sep 18, 2010
- 60
- Maintenance Supervisor Del Monte, retired 30 year
- Ratings:
- +60 / 0 / -0
-
One Aeroforce Interceptor and a VEI Systems Valentine 1 display. Later I reversed them with the VEI on the right instead of the left side due to glare issues with the Aeroforce.
Attached Files:
-
Like x 2
- List
-
-
Post #8 in this thread was my Aeroforce Interceptor gauges in my previous MINI. Here they are re-installed in my '13 Roadster (Yeah, I know this is a 1st Gen thread, but figured this post might pass muster since these units will work in either Gen). Able to use the very same Cravenspeed mount and reconfigured the gauge locations to accommodate the R57/R59 standard "UV Exposure Meter." I also swapped out the gauge faces.
I didn't even need to reprogram them -- they showed the exact same data I had set up previously.
-
Like x 2
- List
-
-
ScottinBend Space CowboySupporting Member
Just a single Scangauge above the tach for me..........I feel so inadequate :biggrin5:
-
Like x 1
- List
-
-
-
Jason Montague New MemberLifetime Supporter
Jason-
Like x 1
- List
-
-
I know its an older thread, but I finally committed to VEI Gauges in orange!!! Order placed today:
Single:
Oil Pressure V1-OPP-MO (Orange display)
Boost V1-BOP-MO (Orange display, PSI)
Dual:
Intake Temp/Intake Temp D1-IAF-IAF-MO (Orange display)
EGT/AFR D1-PYF-WBA-MO (Orange display)
Finally my A-pillar that was inspired by Nathan will be put to use!!!-
Like x 1
- List
-
-
-
BlwnAway,
Nice placement of the gauges. Since it is still winter here, I have no pics to "show you mine". LOL
And only 9 settings for the light? Geesh, you should have at least 10 + different colors. (kidding)
Great job!
Tom -
Jason Montague New MemberLifetime Supporter
Jason -
I can just imagine if anyone looked into the car :lol: -
I couldn't find any still pics of my Aeroforce Interceptor gauges but I made a little video clip last fall after I finished installing them:
[ame=http://www.youtube.com/watch?v=oDtHr9b5MMI&feature=player_embedded]M4H02245 - YouTube[/ame]
I essentially traded off the nice gauge face match of the Marshall gauges (which I had on my previous '05) for the versatility and programmability of the Interceptors, not to mention the vastly easier installation. -
I thought about doing the gauge surround, but with the Chrono Pack either the steering wheel blocked the lower ones on both sides or you have to telescope them so far out there would be tons of vibration. (esp. with my car). I like them around the tach only.
As far as everyones pic's being previously posted, I didn't see a general thread for them, (prob. just misssed it) I figured why not start one so it would be simple for those thinking about it to get ideas, on placement & product options.
Page 1 of 3