this is as straightforward an install
as there ever was! Just use a turkey baster or something like that to empty out the tank first. But this one is so easy that it doesn't even need instructions.
Matt
-
-
-
The clamps can sometimes be a PITA but other than that it's a hella easy mod that looks good and increases the longevity of the already long lived PS bottle. Might want to have a bottle of Pentosin Power Steering Fluid CHF-11S handy just in case.
-
2nd the clamps being a PITA, at least on mine they were. -
ScottinBend Space CowboySupporting Member
Have you replaced the coolant tank also?
-
Way Motor Works New Member
Use a small flatblade screwdriver to pry apart the OEM hose clamps on the hoses. And get 2 regular hose clamps to replace them.
The turkey baster is a good idea, but a battery filler from Advance Auto will work great too. -
My OEM ones are leaking... -
Way Motor Works New Member
I usually just get the standard 1 inch diameter clamps and just make em tight.
If you need the hoses I stock them both
R50/53 Power Steering Pressure line - Way Motor Works
R50/53 Power Steering Suction Line - Way Motor Works