It is an 05 cooper S convertible![]()
Page 1 of 2
-
ScottinBend Space CowboySupporting Member
I disagree.......adjustable plates are just fine. My IE adjustable plates are working just fine.
-
Like x 2
- List
-
-
My first car I built in my garage with my dad. Since then I've never takin a car to the shop
For anything besides paint. So I am fairly mechanically inclined. This will be a fun job, soon hopefully I can put on some new shocks and struts as well-
Like x 2
- List
-
-
Sorry hands got dirty and I couldn't take any more pictures, but rest assured it is all put together now, no need to remove the lower ball joint. Just a little jimmy and shimmy and it all came apart beautifully.
Thanks to everyone that helped out on this thread, the insight made the job much easier than I think it would have been otherwise-
Like x 2
- List
-
-
Jason Montague New MemberLifetime Supporter
:cornut: Ireland Engineering makes good reasonably priced fixed plates that are very popular.
Jason
NICE R52! The Texas plates add 10hp and 8ft/lbstq-
Like x 1
- List
-
-
Minidave Well-Known MemberLifetime Supporter
Is that Pic in Austin? I think I ate there when I was at CoTA in May.....
Top strut bearings are indeed what's making the noise, however you might get by with just putting some grease in there, at least for a while. There's a ball bearing in that top plate and it's probably dry......I think you might even be able to grease it while it's in the car......-
Like x 1
- List
-
-
Jason Montague New MemberLifetime Supporter
-
Welcome, thanks for joining Motoring Alliance, the FUN and Friendly MINI Community.
What is the year and model of the MINI please. -
Jason Montague New MemberLifetime Supporter
:cornut: Welcome to MA. Nathan'll get you fixed up.
Jason -
ScottinBend Space CowboySupporting Member
Sounds like you need new strut bearings, which are an item that wears out. Best advice, if you can afford it, is to replace the OEM ones with somer nice camber plates.
Better handling, beefier parts, better front tire wear. -
ScottinBend Space CowboySupporting Member
-
Crashton Club Coordinator
Yes, push some grease in there & hope for the best. :fingerscrossed:
Page 1 of 2