Interior 1st Gen Most liked posts in thread: Headliner

Anytime, Norm. We all gotta give back or even pay it forward sometime. Or better yet...ALL THE TIME!
M/A is such a great site w/ so many helpful people!

 

^^^^ this is very good a article.

The key to it is when you spray or brush on any glue you have to let it dry BEFORE you press the fabric to the headliner or it will bleed threw.


For small sections that are only pulled back from the edge I recommend spraying the 3M glue or contact cement on a paper plate and use a brush to just add a little bit where you need it. Let it dry for 15-20 min and then push Yee fabric back to the liner.

Of course you have to clean the area first.

 

I did mine with "black suede". Wrapped the pillar covers too. Not too hard of a job. Just time consuming

 

DIY w/ no-maintenance matte pleather.


http://www.motoringalliance.com/forums/interior/17837-headliner-diy.html#axzz3B2AjYyF6

 

^Totally agree w/ you, Dave. Cleaning is key.