Most liked posts in thread: Mini Camden Mission Controls

Welcome, thanks for joining Motoring Alliance, the FUN and Friendly MINI Community.

Help with problems

Malfunction
In the event of malfunctions or error messages,
proceed as follows:
Operation by means of the iPhone.
1. Unplug the iPhone or remove it from the
media snap-in adapter.
2. Connect the iPhone or dock it into the media
snap-in adapter.
3. Restart the MINI Connected app.

If the problem persists, proceed as follows:
1. Switch off iPhone.
2. Switch on iPhone again.
3. Restart the MINI Connected app.
If the problem still persists, reset the iPhone. To
do so, simultaneously press and hold the following
buttons for at least ten seconds:
> Home
> Standby
If the problem still persists, initiate a self-diagnosis.

Self-diagnosis: carrying out
The self-diagnosis tests the connection between
the car and the iPhone.
Operation by means of the iPhone.
1. Unplug the iPhone or remove it from the
media snap-in adapter.
2. "MINI Connected"
3. "Information"
4. "Check connection"
5. "Self-diagnosis"
6. Reconnect the iPhone or dock it into the
media snap-in adapter.

Self-diagnosis: result
> Successful connection: "Connection OK"
> No fault present: "OK"
> Fault present: self-diagnosis aborts.

Self-diagnosis: fault rectification
1. Select the i symbol.
2. Follow the instructions as they appear.
If the problem persists, visit the MINI Connected
support site at:
www.mini.com/connectivity or contact MINI
Service.

If the iPhone has been restarted
Try unplugging and reconnecting the iPhone or
removing it from and redocking it in the media
snap-in adapter in order to use the MINI Connected
app.

MINI Connected app is closed
The MINI Connected app is closed in the following
situations:
> If an incoming call is received.
The MINI Connected app is restarted after
the phone call is finished. There may be
delays in the process.
> When making an outgoing call.
The MINI Connected app must be restarted
after the phone call is finished.

 

I have a Camden Edition as well and had the same thing happen to me one evening. Couldn't change channels, change volume and the screen was stuck on something, but I don't remember what at the moment. I tried everything I could think of, even turned the car off while I was sitting at a red light, all to no avail. Got home and said screw it for now. When I came out in the morning it was fine and I have never had a problem since. So hopefully your will reset itself like mine did.

 

:cornut: 1st post welcome to MA. One of our computer types should be along shortly.

Jason

 

Welcome to M/A the FUN Mini site.

 

welcome to m/a

 

Welcome to M/A! Enjoy the ride!

Hopefully the info that Nathan posted will be helpful!