I always need to convert it back to Merican...
2cm = 3/4" (really .787").... Ahhh that's a bit much...
The dealer's have been known to fill to the high side but I doubt it's 3/4" over the full mark...
The problem will be windage and the crank hitting the oil causing the oil to get whipped to whip cream....so to speak.... When that happens the oil pump will no longer be pumping a liquid but an air entrained froth.... Not a good thing to happen.... Bearings are supported with a layer of oil not oil and air....
Suggest you drain some out....
Like x 1
