Most liked posts in thread: Mynes "Remote Tuning" for the R50/R52/R53

There will be discounts for previously Mynes Tuned customers. Customers in the UK and Europe will get similar discounts from 1320MINI in the UK (they will be our Wholesale Distributor for that region).

For shops who would like to purchase a fully working unit at SAMPLE Pricing (limit one per shop), please send me an email or PM with your Business license and we will get you on the Shipping Queue. This way, you can eval the product before deciding whether you'd like to be a stocking dealer for us.

 

Mike, MSRP is $750 for the MINIFlash Tuning Kit. I'm working on a post to put here on MA (but having a hard time figuring out how to configure a table on my post) :mad2:

There will be an Introductory Price for a short period of time. Customers (such as yourself) who have been Mynes Tuned will get further discount off that price.

UK and European customers will get a discount from 1320MINI in the UK (they will be the Warehouse Distributor for the UK and Europe markets).

 

Here is a list of features and maps that are available in the FA Software:

Major Features:
-Be able to Read Diagnostic Trouble Codes (DTCs) and clear them
-Be able to Clear ECU Adaptations
-Be able to data-log via the OBD Port
-Be able to log AFR thru serial input (Innovate Products)

Timing Parameters:
-Primary Spark Advance
-Secondary Spark Advance
-Ignition Timing 2
-Ignition Timing 3

Misc Parameters:
-Engine Load % Calculation Table

Fuel Parameters:
-Injection Correction 1
-Injection Correction 2
-Main Injection Fuel Map
-Global Fuel Injector Scale Multipiler
-Fuel Mileage Multipiler
-Injector Battery Compenstion
-Enrichment Coefficent Injection Compensation
-Cranking Enrichment vs Engine Temperature Compensation 1
-After Start Enrichment 1

Limits Parameters:
-Rev Limiter
-Torque Limiter 1
-Torque Limiter 2

Throttle Parameters:
-Load/Throttle Position Reference
-Throttle/Requested Torque Map

Intake Parameters:
-Specified Target Intake Air Pressure (hPa)
-Specified Target Intake Air Pressure before compressor (hPa)

Fan Control Parameters:
-Fan Control Low/High/Stage 3 ON Temp

Idle Speed Parameters:
-Target Idle Speed A/C ON MANUAL Drive
-Target Idle Speed A/C ON MANUAL Neutral
-Target Idle Speed A/C ON AUTO Neutral
-Target Idle Speed AUTO in Drive
-Target Idle Speed Manual Trans
-Target Idle Speed Auto Trans

 

Nick, that's where Feature 3 comes in handy... you can log thru the OBD2 port and review the data-logs and check out the "knock-voltage" and "timing retard" values (along with 30 other engine parameters):

Feature 3: Data Logging. If you want to see how the car is running while you’re driving. Simply disconnect the USB cable from the MINIport device (while leaving it connected to the car’s OBD-II port), and the data-logging feature is now active. Blinking red/green/blue lights indicate that the MINIport is actively logging 30+ parameter at 8 samples-per-second, and all this information is stored on the onboard micro-SD card. To view the logs, simply connect the USB cable to the MINIport device and you will see the data on your laptop (it will show up as a “Removable Storage Driveâ€). All MINIports will include a 2GB micro-SD card pre-installed from the factory.

This is a video demo of the data-logs viewed thru the Data-Viewer Program (sold separately)...

[ame="http://s201.photobucket.com/albums/aa102/mynesperformance/?action=view&current=BytetronikDataViewerPlayBackFunctionVideoPart2-1.mp4"]Part I video by mynesperformance - Photobucket[/ame]

 

Video link below:

<http://s201.photobucket.com/albums/aa102/mynesperformance/?action=view&current=BytetronikDataViewerPlayBackFunctionVideoPart2-1.mp4>

 

As previously mentioned, "The FullAccess (FA53) software is a Bytetronik proprietary software " and the hardware (MINIPort) is also Proprietary. So if you have an OBD Device that does not have the "Bytetronik" sticker on it, it's NOT going to work with MINIFlash FullAccess. Just an FYI..

 

units were on Back-Order for a bit, now shipping again