Picture of the lights all finished up! No more chrome on the front of the car
![]()
Page 1 of 2
-
-
I Installed my boost gauge a little while ago, but I didn’t get a chance to take pictures of the install. Did snag a picture of the lighting at night though:
Some new rubber came in today! Will be fitting it up sometime soon.
Also recently picked up an OEM sport antenna and a TSW motor mount. Pics to come soon.-
Like x 4
- List
-
-
So his happened overnight, and its snowing again now:
Its definitley time to get off my extremely warn summers, so it was off to the tire shop. If I had tires any larger than 17x7 they would not have fit very well:
And look what I spotted while there!
-
Like x 3
- List
-
-
Welcome, thanks for joining Motoring Alliance, the FUN and Friendly MINI Community.
Looking forward to seeing more. Purple Haze is one of my favorite colors.-
Like x 2
- List
-
-
Speaking of Modding a Mini, here are some of the parts I just got in and the antenna installed:
-
Like x 2
- List
-
-
Took out my headlight assemblies today to both defog the lenses and paint the trim rings black. I need to decide whether to paint the trim rings in gloss or satin black. Looking into the future I will be painting the roof and mirror caps in gloss black with gloss black wheels. Currently the scoop is plasti-dipped but I could easily paint it gloss as well. The grill is currently flat black and has to stay that way.
-
Like x 2
- List
-
-
ScottinBend Space CowboySupporting Member
That exhaust is an Invidia knock off. Most common complaint.....fitment
-
Like x 1
- List
-
-
Nice! Welcome to MA! your Mini looks good. I know you probably know this but if that is the original belt tensioner it really needs to be replaced. When I did mine I also put on a new idler pulley and ATI crank pulley. If you haven't done it already check your crank pulley and make sure the rubber is not cracking. What kind of exhaust it that? it does have a nice sound. I bought a Chinese exhaust that worked well for about two years now I am going with a Miltek.
You will like it here lots of good people. -
DneprDave Well-Known MemberSupporting Member
Welcome to Motoring Alliance.
Looks and sounds good!
I'm interested in who the manufacturer of the exhaust is too. -
The exhaust was an ebay unit I bought for about $230 shipped, can't find the listing anymore but here is a picture of it before it was installed:
-
Mr. Jim MudsharkLifetime Supporter
Welcome to M/A! Great looking R53! Love the Purple Haze color!!!
-
Welcome!
Nice to have another carpr0n thread to drool over! :arf: -
DneprDave Well-Known MemberSupporting Member
I have the Marshall boost gauge too.
Did you get the regular vacuum gauge or the electronic one? -
-
BlimeyCabrio Oscar Goldman of MINIsLifetime Supporter
- May 4, 2009
- 2,896
- Professional Facilitator and Alignment Consultant
- Ratings:
- +2,896 / 0 / -0
I love Purple Haze / Black Eye Purple. Might be my favorite MINI color.
-
-
RallyMini370 Well-Known Member
Welcome to MA. The friendly folks forum. Nice looking MCS.
-
That is the same exhaust I have. About a year ago it started spitting fiberglass out of the mufflers every time I got on it. The metal is very thin at the resonator that is where mine finally failed. I have blown most of the fiberglass out of ,t so it has gotten very loud. It worked well for a few years. Start saving for a Miltek that is what I am going to replace it with.
Nothin funner then Moding a Mini!
Page 1 of 2