Hella Black Magic with Outmotoring bracket!![]()
-
Mr. Jim MudsharkLifetime Supporter
-
Crashton Club Coordinator
Those oem driving lights are the equivalent of automotive jewelry. All bling & no function. Hella 500 driving lights are not bad & I'm sure they outshine the oem by a long way. Piaa also makes a smallish light that would work well on the oem brackets you have. The Hella 500's may be too large for the brackets you have. I think the lights would bounce about.
My Hella 500 driving lights are mounted on Outmotoring brackets. They are nice & very stable. I have them wired to work with the high beam switch. I wish I could find a suitable bracket to mount them on top of the bumper. I think they light things up better up there.-
Like x 2
- List
-
-
Dave.0 Helix & RMW PoweredLifetime Supporter
I am not a fog light guy but I have see others wire up Hella 500's and they are bright. :eek6:
-
Rawhyde Active Member
You have a fine looking R50 yourself. Best of luck deciding on the driving light upgrade!
-
This thread is making me miss my old MINI...
-
Rally Lights
I purchased a pair of rally lights from Mini Mania and I am impressed with the output of them. (I use them as a daily light by hooking them up to the orange wire inside the headlights and replacing the bulb with a 24w 12v h3 bulb) I find the 55w bulb is way too powerful.
I have the pictures of them posted on "my garage" -
aslondon MemberSupporting Member
- Jan 4, 2015
- 19
- Male
- Retired School District Director of Operations
- Ratings:
- +19 / 0 / -0
I just finished mounting Hella FF500 lights on the out motoring brackets. I tried to mount them in the uppermost position, but found on my car there was a clearance problem with the bumper so I used the middle position which worked perfectly. Hindsight being what it is, I could have / should have just trimmed the inner (unseen) edge of the bumper and all would have been well. It didn't even occur to me at the time!!! Really pleased with the output.
-
I bought a set of PIAA 510 driving lights. These are about the same size as the original, factory fitted lights. I could use the existing brackets, wiring, etc., but after doing a "dry fit" I'm not sure that I like the look of the PIAA's. Might just sell them and deal with the factory lights.