Suspension Brakes Rear Knocking Countryman

Discussion in 'Tuning and Performance' started by wzabrouski, Dec 17, 2016.

  1. wzabrouski

    wzabrouski Active Member

    May 5, 2009
    304
    30
    28
    Executive Director
    Keller, TX
    Ratings:
    +30 / 0 / -0
    I have a knocking in right rear over big bumps? Any ideas. Replaced the sway bar bushings, and rear strut bushings but it is still occurring. Running KW V3's, 25mm rear sway bar, aftermarket end links, and lower rear control arms.
     
  2. Crashton

    Crashton Club Coordinator

    Jun 4, 2009
    18,461
    8,984
    113
    Retired old fart
    Hooterville Ohio USA
    Ratings:
    +9,471 / 1 / -0
    My money is on the end links, but that's only a SWAG.























































    SWAG = silly wild arse guess. :crazy:
     
  3. Dave.0

    Dave.0 Helix & RMW Powered
    Lifetime Supporter

    May 4, 2009
    23,401
    12,725
    113
    Burbs of Philly, PA
    Ratings:
    +13,321 / 4 / -4
    Not dead yet hooker in the trunk?:lol:
     
  4. wzabrouski

    wzabrouski Active Member

    May 5, 2009
    304
    30
    28
    Executive Director
    Keller, TX
    Ratings:
    +30 / 0 / -0
    They seem tight with no play.
     
  5. Crashton

    Crashton Club Coordinator

    Jun 4, 2009
    18,461
    8,984
    113
    Retired old fart
    Hooterville Ohio USA
    Ratings:
    +9,471 / 1 / -0
    Disconnect them, go for a drive & see if the noise goes away. Also clean that dead thing out of the boot.
     
  6. wzabrouski

    wzabrouski Active Member

    May 5, 2009
    304
    30
    28
    Executive Director
    Keller, TX
    Ratings:
    +30 / 0 / -0
    Worth a shot. Thanks
     
  7. Rainman768

    Rainman768 Active Member
    Supporting Member

    May 3, 2012
    162
    74
    28
    Ratings:
    +80 / 0 / -0
    At one point, my clubby had some knocking going on and it ended up being the end links.
     
  8. wzabrouski

    wzabrouski Active Member

    May 5, 2009
    304
    30
    28
    Executive Director
    Keller, TX
    Ratings:
    +30 / 0 / -0
    Turns into it it was a bad endlink.. pic of new ones.


    [​IMG]
     
  9. MCS02

    MCS02 Moderator
    Staff Member Articles Moderator Supporting Member Supporting Member

    Jul 31, 2009
    9,271
    4,976
    113
    Male
    Ratings:
    +5,519 / 4 / -0
    #9 MCS02, Mar 22, 2017
    Last edited: Mar 22, 2017
    Nice, now quit taking pictures of it and put it on the car.:D
     
  10. DneprDave

    DneprDave Well-Known Member
    Supporting Member

    Oct 23, 2010
    2,844
    1,376
    113
    Engineer
    Pacific NW
    Ratings:
    +1,487 / 0 / -0
    I know what new end links look like, post a picture of the worn ones!:D
     
  11. wzabrouski

    wzabrouski Active Member

    May 5, 2009
    304
    30
    28
    Executive Director
    Keller, TX
    Ratings:
    +30 / 0 / -0
  12. Metalman

    Metalman Well-Known Member
    Lifetime Supporter

    Sep 29, 2009
    12,548
    7,420
    113
    Owner of a small custom metal fabrication company,
    Columbus, Ohio
    Ratings:
    +7,432 / 0 / -0
    See... That's what a Texas end link looks like...

    Up here in Ohio..... Arse doesn't look like that... We prefer arse with salt....:mad:
     

Share This Page