Suspension Brakes 1st Gen Most liked posts in thread: Rear Sway Bar Adjustment

move it inboard or to the left in that picture

 

Just remember that you only need to adjust one side at a time. No need for both sides to be changed as you are actually skipping a rate if you do so.
Just putting it out there.

 

I never knew that.

However, when I think about this addled brain says whoa! Would that create an unbalanced Left to Right situation?

 

Hmmmm......
Moving to a different hole changes the length of the lever arm.
It's OK to have mismatched lever arms? I didn't know that?

 

No Nathan. If the bar rotates, as it does, each wheel's movement is distributed throughout 100% of the bar. Yea, hard to explain. Haa
There are many out there with driver adjustable bars that use the flexible blades just on one side, while the other side is just a solid bar.
A three hole ajustable bar has six different rates to adjust too

 

So a 2 hole adjustment bar really has 3 settings? And the sway bar just averages the settings. I just learned something new today.

 

Yep..

 

:beer
That tip is good enough for a beer!! I think lots of us around here owe you one!!