Look in your scangauge manual - under Xgauge programming - has the step-by-step process for setting up an x-gauge. Then use the values provided in the other threads.
Starting on page 24:
http://scangauge.com/support/pdfs/SGMan5_1.pdf
Or here:
ScanGaugeII - Add-A-Gauge
-
BlimeyCabrio Oscar Goldman of MINIsLifetime Supporter
- May 4, 2009
- 2,896
- Professional Facilitator and Alignment Consultant
- Ratings:
- +2,896 / 0 / -0