Most liked posts in thread: Suspension upgrade advice from the Mom folks!

  1. Crashton

    Crashton Club Coordinator

    Jun 4, 2009
    19,428
    10,034
    113
    Retired old fart
    Hooterville Ohio USA
    Ratings:
    +11,662 / 2 / -0
    I think a set of Swift springs & IE fixed camber plates would be good. You'll also need some adjustable lower arms. I'd recommend H-Sports. PM Metalman & ask him what he has done to his JCW. He seems very happy with his setup.
     
  2. wmwny

    wmwny Well-Known Member

    May 29, 2009
    4,036
    2,236
    113
    Male
    Retired
    Piqua, Ohio
    Ratings:
    +2,790 / 10 / -0
    Rear adjustable control arms seem to compliment the beefy rear adj. 3-hole swaybar I have on my S. I have the IE fixed camber plates and a beefier front swaybar, as well as TSW springs.
     
  3. CHKMINI

    CHKMINI Club Coordinator
    Lifetime Supporter

    Sep 1, 2009
    9,244
    3,802
    113
    Ratings:
    +3,863 / 0 / -1
    I'm happy with lowering springs and Koni yellows. Coil overs are great but I didn't like the ride when I had them on my R53. If I would seriously need them more than 4 or 5 times a year that would be different. For running back roads and a trip to the Dragon once a year the springs and Koni's have worked well for my last 2 JCW's. 25mm Hotchis Competition Sway Bar, Hotchis lower control arms and camber plates. Just my 2 cents. Have Josh powdercoat the springs and control arms red.
     
  4. Dave.0

    Dave.0 Helix & RMW Powered
    Lifetime Supporter

    May 4, 2009
    25,021
    13,497
    113
    Burbs of Philly, PA
    Ratings:
    +14,644 / 10 / -4
    The Philly burbs have roads just like Ohio roads because of snow and salt. No mater what coil overs you get make sure you add Swift springs. They are the key to a nice ride but are still able hold the road very well when you run the Dragon.

    Just my $ .02 :D
     
  5. BThayer23

    BThayer23 Well-Known Member

    Jun 12, 2009
    1,315
    154
    63
    Civil Engineer
    Durham, NC
    Ratings:
    +155 / 0 / -0
    Don't forget to upgrade your bushings - lower control arm bushings and lower engine mount aka torque arm offer the biggest bang for the buck. Stiffer polyurethane LCA bushings will give better precision while turning at the limit.