Engine Drivetrain 1st Gen Cooper S Most liked posts in thread: Taking apart the getrag

Page 2 of 2
  1. 1r53

    1r53 New Member

    Dec 21, 2010
    52
    1
    0
    Ratings:
    +1 / 0 / -0
    #22 1r53, Jan 15, 2011
    I did some looking around and there is one place that I called and they are going to check some part numbers for me. Because some of the parts that I needed had the same part numbers as the svt focus, and they make syncros for svt. But I have not confirmed that they will work yet.
     
  2. KC Jr 54

    KC Jr 54 New Member

    Jun 3, 2009
    402
    20
    0
    Machine Operator
    Tyler, TX
    Ratings:
    +20 / 0 / -0
    #23 KC Jr 54, Jan 28, 2011
    Alright, so what is the latest with all this ?!
     
  3. 1r53

    1r53 New Member

    Dec 21, 2010
    52
    1
    0
    Ratings:
    +1 / 0 / -0
    #24 1r53, Jan 29, 2011
    I am still waiting on some parts, its driving me crazy.
     
  4. 1r53

    1r53 New Member

    Dec 21, 2010
    52
    1
    0
    Ratings:
    +1 / 0 / -0
    #25 1r53, Feb 17, 2011
    Ok, so here is the update on the transmission, I also found a crack in the case so I am just doing an 05 transmission swap. So I will be parting the 02 transmission out. I do have all of the shifting forks, syncros are good and and I have an un used obx differentaial that I am selling ( keeping my quaife). I really dont know what to ask for transmission parts, but I will sell the obx for 150.00, let me know
     
  5. Metalman

    Metalman Well-Known Member
    Lifetime Supporter

    Sep 29, 2009
    12,731
    7,688
    113
    Ex-Owner (Retired) of a custom metal fab company.
    Columbus, Ohio
    Ratings:
    +7,960 / 1 / -0
    #26 Metalman, Feb 17, 2011
    Sorry about discovering the transmission crack, you can't find a local welder to repair the crack?
    I do quite a bit of aluminum repair work on engines / transmission for a local dismantler here in Columbus. It's not difficult work.

    Were you ever able to locate a source for the syncro's and dog rings?
     
  6. 1r53

    1r53 New Member

    Dec 21, 2010
    52
    1
    0
    Ratings:
    +1 / 0 / -0
    #27 1r53, Feb 17, 2011
    I called around to different manual transmission shops. And found out threw part numbers that the svt and mini have the same parts. the one shop I was working with helped me find out if the svt parts would fit. Also they have svt parts available, not mini.
     
  7. Metalman

    Metalman Well-Known Member
    Lifetime Supporter

    Sep 29, 2009
    12,731
    7,688
    113
    Ex-Owner (Retired) of a custom metal fab company.
    Columbus, Ohio
    Ratings:
    +7,960 / 1 / -0
    #28 Metalman, Feb 17, 2011
    You might want to post up the P/N's, I'm sure the M/A members will find this information useful.:Thumbsup:
     
  8. 1r53

    1r53 New Member

    Dec 21, 2010
    52
    1
    0
    Ratings:
    +1 / 0 / -0
    #29 1r53, Feb 17, 2011
    Also the large bearings that hold the input shaft and gears into the back of the case, I found a cheaper replacment it is made by sfk and the part # is 6206 2rsnrjem they were 20 buck .
     
  9. KC Jr 54

    KC Jr 54 New Member

    Jun 3, 2009
    402
    20
    0
    Machine Operator
    Tyler, TX
    Ratings:
    +20 / 0 / -0
    #30 KC Jr 54, Feb 17, 2011
    I will most likely take that OBX diff off of your hands. Give me a week or two to figure things out, and ill get with you ASAP.
     
  10. 1r53

    1r53 New Member

    Dec 21, 2010
    52
    1
    0
    Ratings:
    +1 / 0 / -0
    #31 1r53, Feb 17, 2011
    syncro part number is 002.8.0621.01 that is the part number for all of the syncros shift fork 1 is 285.9.0320.90 1/1, shift fork 2 is1/2 285.9.0296.90, shift fork 3 is 285.9.0328.90 1/2, shift fork 4 is 285.9.0255.90 1/2 hope that helps, syncros were around 200.00 and forks were 125.00 each
     
  11. 1r53

    1r53 New Member

    Dec 21, 2010
    52
    1
    0
    Ratings:
    +1 / 0 / -0
    #32 1r53, Feb 17, 2011
    Just let me know KC JR 54 :Thumbsup:
     
  12. jiminni

    jiminni Well-Known Member

    May 7, 2009
    1,592
    262
    83
    Ca.
    Ratings:
    +262 / 0 / -0
    #33 jiminni, Feb 17, 2011
    I am doing the same thing on my 03 MCS, the 05 tranny swap :Thumbsup: Have all my parts assembled, tranny, FX400 clutch, Fidanza flywheel and the Phantom grip LSD.
     
  13. sdracing

    sdracing New Member

    Aug 7, 2011
    5
    0
    0
    Ratings:
    +0 / 0 / -0
    #34 sdracing, Aug 7, 2011
    i hope i can still reach someone about this on here.

    i have just opened my trans because i lost reverse. found shifter fork for reverse broken. by reading your thread, im not happy that mini doesn't sell replacement parts.

    1r53, the parts you have listed, who can i order them from and which fork is for reverse?
     
  14. nabeshin

    nabeshin New Member

    Jun 8, 2009
    409
    1
    0
    Lincoln, NE
    Ratings:
    +1 / 0 / -0
    #35 nabeshin, Nov 9, 2011
  15. dbobway

    dbobway New Member

    Sep 5, 2013
    2
    1
    0
    Ratings:
    +1 / 0 / -0
    #36 dbobway, Sep 24, 2013
    Getrag 6 spd.

    Any chance a repair manual is available for my 2006 Cooper S Getrag 6 spd. I have a bad bearing and thats about all. I just want to do the rebuild with more knowledge than what I know on my Old Chevy manual rebuilds from my past.
     
Page 2 of 2