Most liked posts in thread: Urgent: 05 mini s putting megan coils on

  1. Motoring Magic

    Motoring Magic New Member
    Motoring Alliance Sponsor

    Dec 13, 2009
    397
    266
    0
    Motoring Magic Owner, Ventura County's ONLY MINI s
    Thousand Oaks, Vta cty, socal
    Ratings:
    +266 / 0 / -0
    #2 Motoring Magic, Mar 9, 2014
    Last edited: Mar 9, 2014
    You are thinking wrong-you must remove the entire assembly with the two 13 mm head bolts facing downwards (towards the ground) then assemble the top "hat" or mounting parts to your coilovers. assembly is the reverse of disassembly-you cannot access the top nut while assembly is on car
     
  2. Jason Montague

    Jason Montague New Member
    Lifetime Supporter

    Jan 5, 2010
    6,134
    1,588
    0
    Physician Assitant (retired)
    Sherman,Tx
    Ratings:
    +1,588 / 0 / -0
    #3 Jason Montague, Mar 9, 2014
    :cornut: 1st post! Welcome to MA.:Thumbsup:

    Jason
     
  3. Dave.0

    Dave.0 Helix & RMW Powered
    Lifetime Supporter

    May 4, 2009
    25,021
    13,497
    113
    Burbs of Philly, PA
    Ratings:
    +14,644 / 10 / -4
    #4 Dave.0, Mar 9, 2014
    Do this ^^^^ you cannot access the top of the rear shock from inside or outside the car until you remove them by taking out the two 13 mm mentioned above. :Thumbsup:


    Welcome to M/A. :Thumbsup:
     
  4. jeanniemp

    jeanniemp New Member

    Mar 9, 2014
    9
    3
    0
    Ratings:
    +3 / 0 / -0
    #5 jeanniemp, Mar 10, 2014
    Okay thanks a lot I had to hault on the install. The bolt on the bottom front strut just broke so I have to get it drilled today... already tried myself and the drillbit is in there now :'(